Chicago Electric 03633 - Parts and Diagrams; Solenoid Bracket Installation; Winch Parts List

SKU 3633 For technical questions, please call 1-800-444-3353. Page 9
WINCH PARTS LIST
traPnoitpircseDytQtraPnoitpircseDytQ
1,emarFgnitnuoM )dedulcniton( 12201x6MwercspaC1
2daelriaF132nuS,etaidemretnI-raeG1
353x01MwercspaC4
42nuS,tupnI,raeG1
401ørehsawkcoL452csiDtsurhT1
501øtalF,rehsaW462rehsaWtsurhT3
601MtuN472murD-gnihsuB2
7gniraeBdnE1
82teksaG1
8gnirpS692gnisuoHraeG-revoC1
9gniRgnikcoL10321x4MwercS6
01raBeiT213murD1
11gniRmaC123.y'ssAtfahS/kaerB1
2152x6MwercspaC4
33.y'ssAgniraeBdnErotoM1
316MtuN443y'ssAdioneloS1
41gniR,raeG153y'ssAhctiwS1
51raeGgniR,reniateR163.aiD)mm8(61/5'59-ylbmessAelbaC1
61gniRflaH2
73tuptuo-y'ssAreirraCraeG1
7191x6MwercspaC683etaidemretni-y'ssAreirraCraeG1
81nus,tuptuO-raeG193tupnI-y'ssAreirraCraeG1
91tfahs-gnihsuB1
04tekcarBdioneloS1
029x3øniPlloR114partSgnidniBcitsalP1
12rohcnAelbaC1
Solenoid Bracket
Installation Instruction
To attach the Solenoid Bracket supplied.
Remove the 2 Capscrews (12) and the 2 Retaining
Nuts (13) from the Motor End Bearing Assy., then
aligning the solenoid Bracket with the 2 tie bar
mounting holes. Re-secure the Tie Bars and attach
the Solenoid Bracket to the Motor End Bearing Assy
(33) using the 2 Capscrews (12) and the 2 Retaining
Nuts (13) that were previously removed. Torque
tightly.
Support Bracket
Tie down strap
to hold support
Bracket in place.
Retain the Solenoid Bracket supplied to the Motor End Bearing Assy. (33) by
attaching the Tie Down Strap around both the Solenoid Bracket and the Motor End
Bearing Assy. Pull Strap until tightly secure.
REV 09/05
Brought to You by Augusta Flint