Chicago Electric 42934 User Manual

ANGLE GRINDER - 5 INCH
WITH METAL CASE
ASSEMBLY and OPERATING
INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2000 by Harbor Freight Tools. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
42934

Chicago Electric 42934 Specifications

General

Type	Angle Grinder
Arbor Size	5/8 inches
No Load Speed	11, 000 RPM
Disc Diameter	4.5 inches
Voltage	120 V
RPM	11000 RPM
Spindle Thread	5/8 inches
Wheel Thickness	0.25 inches
Wheel Diameter	4.5 inches

Summary

Specifications and Manual Handling

General Safety Warnings

Crucial safety advice for using the tool, covering work area, personal safety, and tool usage.

Unpacking and Assembly

Accessory and Guard Guidelines

Ensuring correct guards are used and accessories fit properly and are securely tightened.

Mounting and Operation

Mounting Wheel Accessory and Handle

Detailed instructions for attaching accessories and the handle to the angle grinder.

Spindle Lock and Clamp Nut Procedure

Steps to engage the spindle lock and use the wrench to loosen/tighten the clamp nut.

Handle Attachment

Guidance on screwing the handle into the designated holes on the gear cover.

Operation Guidelines

Recommendations for safe operation, including using approved accessories and adhering to RPM ratings.

Operating and Maintenance Procedures

Tool Operation Steps

Instructions on plugging in, gripping, operating the trigger, and handling the tool during use.

Maintenance Instructions