Chicago Electric 44141 User Manual

ELECTRIC LONG SHAFT DIE
GRINDER
ASSEMBLY and OPERATING
INSTRUCTIONS
44141
1/4” Collet Accepts Most Popular Die Grinding Accessories
REV 06b
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2000 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.

Chicago Electric 44141 Specifications

General

Brand	Chicago Electric
Model	44141
Category	Grinder
Language	English

Summary

Assembly and Operating Instructions

Safety Warnings and Precautions

Operation Safety and Maintenance

Personal Safety and Alertness

Wear face shield/dust mask, avoid overreaching, stay alert, and do not operate under influence.

Accessory and Material Warnings

Chemical and Dust Exposure

Accessory Speed Rating

All accessories must be rated for at least 25,000 RPM. Use approved guards and ensure proper fit.

Prohibited Accessories

Never install carbide tipped saw blades, wood carving blades, or cutting discs on this die grinder.

Operation Procedures

Collet Chuck Usage

Understand collet chuck sizes and proper mandrel insertion (at least 5/8") for secure operation.

Rotary Files and Grinding Wheels

Tool Handling and Control

Grip and Airflow Management

Operating Technique

Gently contact workpiece, let the tool work. Avoid excessive pressure which can cause injury or damage.

Maintenance Procedures

Carbon Brush Inspection and Replacement

Inspect and clean carbon brushes regularly. Replace worn brushes. Ensure they slide freely into holders.

Limited 90 Day Warranty

Warranty Coverage and Exclusions