To Next Page
J
Jeremy PonceJul 30, 2025
What to do if my Chicago Electric 90045 will not start?
- BBrandon HarrisonJul 30, 2025
If your Chicago Electric Sander won't start, first ensure the cord is properly plugged in. Then, check if the outlet has power. If not, check the circuit breaker, making sure the circuit capacity is adequate and not overloaded. If your tool has a thermal reset breaker, turn it off, let it cool, and press the reset button. If none of these steps work, it may have internal damage or wear, and should be serviced by a qualified technician.
General
