EasyManua.ls Logo

Chicago Electric 95380 - User Manual

Chicago Electric 95380
18 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ROUTER TABLE WITH ROUTER
Model
95380
SET UP AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual Revised 11c

Table of Contents

Questions and Answers

  • H
    hodgesaliciaJul 31, 2025
    Why Chicago Electric 95380 Power Tool router is not running?
    • J
      Jose LopezJul 31, 2025
      If your Chicago Electric Power Tool router isn't running, first, ensure the Router Table's Power Switch is in the 'ON' position. Next, check that the Router's Power Switch is also 'ON'. Confirm the Router's Power Cord is connected to the Power Table’s Outlet and that the Router Table's Power Cord is connected to a working, 110 volt, grounded, electrical outlet. Also, inspect the Power Cords of both the Router and Router Table for any damage. If these steps don't solve the issue, the carbon brushes may need replacing, or you may need to have a qualified service technician check the Router and Router Table for defects.
  • J
    jenna01Aug 10, 2025
    What to do if Chicago Electric 95380 Power Tool has excessive vibration?
    • M
      michaelmooreAug 10, 2025
      If your Chicago Electric Power Tool is vibrating excessively, make sure the Router is properly and firmly attached to the Router Table. Also, ensure the Bit in the Router is sharp and properly installed, and that the Bit is not bent or damaged. If the problem persists, have a qualified service technician check the Router and Router Table for defects.
  • C
    Catherine MorenoAug 19, 2025
    What to do if the power switch of Chicago Electric 95380 doesn't turn off?
    • F
      Faith LewisAug 19, 2025
      If the Power Switch of your Chicago Electric Power Tool Router and/or Router Table does not turn off the tool, immediately unplug the Router Table’s Power Cord from its electrical outlet and discontinue using tool until a qualified service technician checks the Router and Router Table for defects.

Summary

General Safety Rules

Work Area and Bystander Safety

Keep work area clean, well lit, and free of clutter; keep bystanders away.

Electrical Safety

Electrical Safety Precautions

Covers grounding, protection from water, and power cord handling for safe operation.

Personal Safety Precautions

Operator Awareness and Safe Practices

Emphasizes alertness, proper attire, tool selection, and safe operating procedures.

Specific Safety Rules

Safe Operation Practices

Covers bit speed, guards, workpiece security, and safe cutting procedures.

Work Area and Tool Security

Material Handling and Hazard Control

Grounding Procedures

Grounding Requirements and Warnings

Covers proper grounding, outlet types, and potential shock hazards.

Assembly Instructions

Attach Legs to Router Table

Mount Router Table on Workbench

Install Router Bit Safely

Adjust Router Cutting Depth

Basic Operating Instructions

Safety Equipment and Preparation

Wear safety gear, prepare router and bit, and connect to power before operation.

Workpiece Handling and Feeding

Troubleshooting Guide

Common Operational Problems and Solutions

Inspection, Maintenance, and Cleaning

Maintenance Safety and Procedures

Covers safety during maintenance, pre-use checks, and carbon brush care.

Chicago Electric 95380 Specifications

General IconGeneral
BrandChicago Electric
Model95380
CategoryPower Tool
LanguageEnglish

Related product manuals