To Next PageTo Next PageWhat to do if the grinding wheel on my Chicago Electric 99823 is not running smoothly?
If the grinding wheel on your Chicago Electric Power Tool isn't running smoothly, it could be that the grinding wheel isn't true because of wear during use. Inspect the grinding wheel to ensure it has a smooth, straight edge. Replace the grinding wheel if needed.
General| No Load Speed | 11, 000 RPM |
|---|---|
| Spindle Lock | Yes |
| Voltage | 120V |
| Power Source | Corded Electric |
| Disc Diameter | 4.5 in |
| Horsepower | 0.75 HP |
| Wheel Arbor | 5/8 in |
| Spindle Thread | 5/8 in.-11 |
| Arbor Size | 5/8 in |
| Tool Length | 10.5 in |
Emphasizes the importance of comprehending all provided instructions before operation.
Outlines essential safety measures for the operational environment to prevent accidents.
Details the polarized plug's function and proper usage to prevent electric shock.
Specifies the minimum RPM rating required for the grinding wheel.
Mandates wearing safety goggles and heavy-duty gloves during operation.
Details how to attach the standard, drill bit, and chisel/plane attachments.
Step-by-step guide for sharpening drill bits using the specific attachment.
Specific procedure for sharpening drill bits smaller than 9/64".
Instructions for sharpening knives using the appropriate attachment.
Detailed steps for sharpening scissors with the dedicated attachment.
Identifies common problems and their solutions.
