SKU 67537 For technical questions, please call 1-800-444-3353. Page 8
SPECIFICATIONS
Electrical Input 120 V~ / 60 Hz / 2 A
Speed
10,000 - 20,000 OPM
93-95 dB @ 1m at speed #6
75 dB @ 1m at speed #1
Sanding Pad
Dimensions
3” Triangle
Accessories
Sanding Pad (Qty. 1)
Sanding Paper (Qty. 2)
Cutter Blade (Qty. 1)
Scraper (Qty. 1)
Half-Circle Blade (Qty. 1)
Hex Wrench (Qty. 1)
Carbon Brushes (Qty. 2)
Molded Storage Case (Qty. 1)
Accessories
Half-Circle
Blade
Scraper
Cutter
Blade
Hex Wrench
6mm
Sanding
Pad
Sanding
Paper
UNPACKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at
1-800-444-3353 as soon as possible.
Components
Figure 2
Power Switch
(24)
Speed
Dial
(39)
Accessory
Cutter
Blade
ON
OFF
ASSEMBLY INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch (24) off
and unplug the tool from its
electrical outlet before
assembly.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
To Next Page
Loading...
