14
UAS REMOVAL & STORAGE
Removing UAS
Pull UAS Connectors out of storage
pockets while lifting up on UAS Release
Lever.
Storing UAS:
1
Insert UAS Connectors into storage
pockets.
2
Pull UAS Pull Strap to secure UAS
Connectors.
3
Roll UAS Pull Strap and store in Pull
Strap Storage Pocket.
This infant restraint system can be safely installed using vehicle
belts or UAS. UAS is a Infant restraint system attachment
system that is standard in most vehicles manufactured
after September 1, 2002. Refer to your vehicle owner’s
manual for details regarding UAS use in your vehicle.
1
2
3
When not using UAS, the UAS Connectors and Pull Strap MUST be
stored properly to allow Carrier to attach securely to Base.
To Next Page
Loading...
