ADDITIONAL INFORMATION
88
89
ADDITIONAL INFORMATION
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
• Fabrics may be spot-cleaned:
Hand wash using mild soap and water, or machine washed in cold water
on delicate cycle using mild detergent. Hang to dry. See page 70 for
removal instructions.
• Foam Insert:
Hand rinse and air dry.
• Cleaning Plastics:
Sponge clean using warm water and mild soap. Towel dry.
• Cleaning Lower Anchor Connectors Hardware and Straps:
Lower Anchor Connectors hardware and straps cannot be replaced.
Sponge clean using warm water and mild soap. Air dry.
• Storing the Booster:
When it is not installed in the car, it is recommended to store the
Booster in a dry place, away from sources of heat, dust, humidity and
direct sunlight.
DO NOT USE BLEACH, solvents or household cleaners as they may
weaken plastics and straps.
DO NOT USE SOAPS OR LUBRICANTS on Lower Anchor Connector
hardware. It may cause them to malfunction.