5.Positiontheboosterseatonthechair(diagram7);
whenusingthisproductitisrecommendedtoplace
it on a chair whose minimum dimensions comply
withthoseillustratedindiagram8.Connecttherear
harness straps (D) by threading it behind the seat
backrest,asseenindiagram9andthelowerharness
straps (E) around the seat, as seen in diagram 10;
whenmountedcorrectlytheywill‘click’intoplace.
PullthefreeendsoftheharnessstrapsDandEto
adjustthelengthuntiltheboosterseatisrmlyan-
choredtothechair(diagram11).
6.Oncetheboosterseat has beenfastenedtothe
chairseatandbackrest,placethechildinsideasfol-
lows:
a.Releasetheclaspsfromthethreepointsafetyhar-
ness(C)asindicatedinDiag.12A
b.Placethechildontheboosterseatandstraphimin
withthesafetyharness.Checkthatthesafetyhar-
nessstrapclaspsarettedcorrectly(diagram12B).
7.Connecttheactivitytraytotheboosterseatby
turningthesidehandlesoutwards,andpressingthe
central connector button (G) on both sides of the
booster seat (see diagrams 13A/13B). The stabilis-
ers(H)onbothsidesoftheconnectorbuttonaimto
guaranteestabilityforthetray;checkthattheactiv-
itytrayisconnectedtoatleastoneconnectorbut-
ton,andneversolelyusingthestabilisers(diagram
13C).Theactivitytraycanbeadjustedto3different
positions(diagram13D).
FOLDING AWAY AND TRANSPORT
8.Removetheactivitytrayusingthesidehandlesas
illustratedinsection2.
9.Pressthereleasebutton(K)atthebottomofthe
backrest, as seen in diagram 14°, pullthe backrest
Aupwardsandthenlowerit(diagram14B)untilit
closes.
10.Fastentheactivitytraytothebuttons H, posi-
tioningitasillustratedinDiagram15,sotheproduct
isultra-compacttocarryaround.
11.Fastenthelowerharnessbelts(E)threadingthem
overtheactivitytray,asseeninDiag.16.
12.Theboosterseatcaneasilybecarriedaroundus-
ingtherearharnessbelts(D)asseenindiagram17.
Simplylengthenthestrapsasneeded.
REMOVING THE FABRIC PARTS
13.Toremovethefabricfromthe backrest,release
theelasticsfromtheirsupportsonthebackofthe
cover(diagrams 18A/18B), then unthreadthefas-
tenertabs found atthe top of the fabric fromthe
frame(diagram19).
14.Toreplacethefabriccoveronthebackrest,follow
theinstructionsprovidedinsection13inthereverse
order,insertingthefastenertabstotheuppersection
oftheframeandfasteningitinplaceconnectingthe
elasticstothesupports.
15.Toremovethefabricfromthebackrest,turnthe
frameover,releasetheelasticsfromtheirsupports
onthelowerpartoftheseat(diagrams20A/20B);
thenreleasetheelasticsfromthesupportsontheup-
perpartoftheseat(diagram21A/21B).
16.Toreplacethefabriccoverontheseat,followthe
instructionsprovidedinsection14inthereverseor-
der,connectingtheelasticstotheupperpartofthe
searandtheotherelasticstothelowerpartofthe
seat.Remembertothreadthesafetyharnessstraps
throughtheslotsinthefabriccover.
FOR FURTHER INFORMATION
ARTSANAUKLtd.
ProspectClose-LowmoorRoad
IndustrialEstate-KirbyinAsheld
NottinghamNG17/7LF-EnglandU.K.
Tel.+441623750870(ofcehours)
HYPERLINKwww.chicco.com
19