42
REAR-FACING INSTALLATION
INSTALL USING LATCH
Locate the LATCH Connector Storage compartments. Remove LATCH
straps. Make sure
SuperCinch
™
LATCH Tightener strap (Pull 2
nd
)
and LATCH Adjuster strap (Pull 1
st
) are loosened to their full length.
Grab both ends of LATCH straps. Slide LATCH strap to blue
REAR-FACING opening on both sides. Note: Both LATCH Connector
Storage compartments must be open and both LATCH straps must be
loosened to their full length in order to slide LATCH straps into
position.
Close both LATCH Connector Storage compartments.
1
2
When not accessing the LATCH or changing the
belt path ALWAYS keep LATCH Connector Storage
compartments closed.
3
To Next Page
Loading...
