Chicco NextFit - Install Using LATCH

58
FORWARD-FACING INSTALLATION
FORWARD-FACING SETUP
Place Child Restraint facing forward on selected vehicle seat. Make
sure it is not blocking the vehicle belt buckle. Lay Tether Strap over the
back of the vehicle seat.
5
4
•LATCH installation continued on page 60.
•Lap-ShoulderBelt installation continued on page 66.
•LapBeltOnlyinstallation continued on page 72.
Installation Options:
Installation on a Level Surface: Locate the Bubble Level Indicator
label and re-adjust the seat recline to any position that the Bubble
falls between the lines for FORWARD-FACING installation.
Installation on a Slope: If vehicle is on a slope adjust the seat
recline to position 8 or 9 ONLY.
L E V E L
SLOPE
L E V E L
SLOPE