What to do if ChimneyFree Indoor Fireplace heater doesn’t work even if the switches are on?
If your ChimneyFree Indoor Fireplace heater isn't working even when the power and heater switches are on and the thermostat is at its highest setting, the thermal protector may have tripped. To resolve this, turn all switches to the OFF position and unplug the unit from the wall outlet for 5 minutes. After 5 minutes, plug it back in and operate as normal.
Why is my ChimneyFree CFI-470-03 not producing enough heat?
If your ChimneyFree Indoor Fireplace isn't producing enough heat, ensure that it is plugged directly into the wall, not into a power strip, surge protector, or extension cord. Also, make sure the unit is located on an interior wall.
How to fix ChimneyFree CFI-470-03 Indoor Fireplace that does not turn on?
If your ChimneyFree Indoor Fireplace stove does not turn on manually, check the circuit breakers and try a different outlet to ensure there is incoming power. Also, make sure to manually press the main power button on the front of the unit. If the switch is defective, it should be replaced.
Why is my ChimneyFree Indoor Fireplace blowing cold air?
If your ChimneyFree Indoor Fireplace is blowing cool or cold air, the heater blower motor may be defective. You should replace the heater/blower assembly.
What to do if ChimneyFree CFI-470-03 Indoor Fireplace heater is not turning on?
If your ChimneyFree Indoor Fireplace heater is not turning on, manually press the main power button on the front of the unit. If that doesn't work, the heater switch or the heater blower motor may be defective and needs to be replaced.
Why is my ChimneyFree CFI-470-03 making noise when the heater is on?
If your ChimneyFree Indoor Fireplace is making noise when the heater is on, the heater blower motor may be dirty or defective. Gently vacuum the heater blower vents. If the noise persists, replace the heater/blower assembly.
Why does the power cord of my ChimneyFree Indoor Fireplace get warm?
If the power cord of your ChimneyFree Indoor Fireplace gets warm, check your heater cord and plug connections. Faulty wall outlet connections or loose plugs can cause overheating. Ensure the plug fits tightly in the outlet. If the plug outlet or faceplate is HOT, discontinue use and have a qualified electrician check or replace the faulty outlet(s).
How to fix ChimneyFree CFI-470-03 flames that are not moving?
If the flames in your ChimneyFree Indoor Fireplace are not moving, the flame generator drive motor may be defective and needs to be replaced. Alternatively, the spinner might have detached from the motor. Remove the back panel and check if the spinner is correctly mounted to the motor.
Why is my ChimneyFree CFI-470-03 Indoor Fireplace making noise with flames on but heater off?
If there is noise with the flames on and the heater off in your ChimneyFree Indoor Fireplace, the flame generator drive motor may be defective and needs to be replaced. If the back panel is dented or the spinner shaft is warped, refer to TSI customer service.
Why are the flames not visible on my ChimneyFree CFI-470-03 Indoor Fireplace?
If the flames in your ChimneyFree Indoor Fireplace are not visible, the light bulb may be burnt out. Replace it with a 40-watt candelabra bulb.
Essential safety guidelines to follow when using the electric stove to prevent hazards.
Steps for product warranty registration and locating serial number for customer service.
Technical details including voltage, amperage, and maximum wattage of the appliance.
Instructions for attaching the handle to the stove door using screws.
Step-by-step guide for attaching the legs to the stove base securely.
Procedures for cleaning the trim and general maintenance advice for the appliance.
Explanation of the control panel functions, including thermostat, heater, and dimmer settings.
Detailed steps for safely replacing the internal light bulb of the stove.
A guide to identify and resolve common problems encountered with the electric stove.
Diagram and list identifying all parts of the stove with their corresponding part numbers.
Details on the limited warranty, including terms, conditions, and reasons for voiding.
Information on how to contact customer service and what details to prepare.
General| Type | Electric Fireplace |
|---|---|
| Heat Output | 4700 BTU |
| Heating Area | Up to 400 sq. ft. |
| Voltage | 120 V |
| Flame Effect | Yes |
| Remote Control | Yes |
| Timer | Yes |
| Adjustable Flame Brightness | Yes |
| Adjustable Thermostat | Yes |
| Overheat Protection | Yes |
| Power Consumption | 1400 Watts |
| Style | Freestanding |
To Next Page
