What to do if the GRID LED is blinking on Chint Power Inverter?
If the "GRID" LED on your Chint Power Inverter is blinking, take the following steps: 1. Turn off the external AC breaker. 2. Switch the DC switch to the “OFF” position. 3. Check that the grid voltage is normal and the cable connection of the AC side is correct and secure.
How to troubleshoot a Chint Power CPS SCA60KTL-DO/US-480 Inverter when neither the Power LED nor the LCD screen lights up?
If neither the “Power” LED nor the LCD screen on your Chint Power Inverter lights up, follow these steps: 1. Turn off the external AC breaker. 2. Switch the DC switch to the “OFF” position. 3. Check the PV input voltage and polarity.
Overview of the inverter's role in grid-tied PV systems.
Key features and specifications of the PV inverters.
Lists the various protection functions integrated into the inverter.
Procedures and considerations for mechanical installation of the inverter.
Detailed steps for electrical installation, including connections.
Step-by-step guide for commissioning the inverter.
Troubleshooting guide for common faults and LED indicators.
General| Model | CPS SCA60KTL-DO/US-480 |
|---|---|
| Type | String Inverter |
| Rated Output Power | 60 kW |
| Max. DC Power | 66 kW |
| Input Voltage Range | 200 - 1000 V |
| Max DC Input Voltage | 1100 V |
| Number of MPPTs | 2 |
| Protection Class | IP65 |
| Max. AC Power | 60 kW |
| Nominal AC Voltage | 480 V |
| Max. AC Current | 80 A |
| Protection Degree | IP65 |
| Frequency | 60 Hz |
| Operating Temperature Range | -25°C to +60°C |
| MPPT Voltage Range | 200-1000V |
| MPPT Range | 200-1000V |
To Next Page
