Chord Electronics
Étude | Manual
_
When connecting the Étude to
equipment within the signal path,
ensure all devices are switched
o. It is recommended that
once all equipment is properly
connected, that the volume
setting is operated to its lowest
setting, before slowly being
raised to a comfortable listening
level. Always observe partnering
manufacturers’ guidelines.
4.1 Placement
4.2 Connecting Étude to
ancillary equipment
4.3 Line level inputs
4.4 Audio outputs
4.5 Power-on sequence
4.6 Earthing issues in Europe
Connecting Étude to ancillary
equipment
4.2
18 // 26
To Next Page
Loading...
