Chord Electronics
Étude | Manual
_
6 // 26
There are no user-
serviceable components
within the Étude or
its power supply. Dangerous
voltages/currents exist within
the Étude and its power
supply, posing a severe risk of
electrocution and/or fire.
Never attempt to
open, dismantle or
apply internal third-
party devices to it or insert
anything other than the listed
interconnects or speaker cables
within this user manual.
If the Étude develops a fault or
the casework becomes damaged,
immediately disconnect from
the mains power supply and
connected equipment and
contact Chord Electronics for
further advice.
1.1 Introduction
1.2 Protection against
liquids & heat
1.3 Dismantling & radio frequency
interference
1.4 Connecting your equipment
Dismantling & radio
frequency interference
1.3
With a thick, solid aluminium
chassis, Étude’s casework
largely protects the sensitive
internal circuitry from radio
frequency interference. However,
for optimal performance, it is
recommended that the following
points are observed:
1.Consider placing the
Étude away from
wireless routers.
2.Separate the
Étude from
amplifiers using
toroidal transformers.
3. Operate mobile
phones at a distance
to avoid interference.
Although the Étude
is largely shielded, it
can generate radio
frequency interference that
may have an eect on radio
and television reception. If this
occurs, please reconsider your
placement.
To Next Page
Loading...
