Digital Inputs
Whether you are using a computer, phone, tablet or any other device to play back your music, you will be using the digital
inputs of the Mojo 2.
The Mojo 2 can also be used wirelessly with the Chord Poly. This will be covered in more detail in the Poly section of this
document.
From right to left, you have:
– Optical/Toslink input.
– MicroUSB used for power.
– MircoUSB used for data.
– USB C port used for data.
– 3.5mm coaxial port.
– The 3.5mm coaxial port can support both standard coaxial connections as well as dual data coax if you wish to use this device
with the M Scaler.
From Chord Electronics,
“The Hugo M Scaler is a highly advanced standalone upscaler capable of redening sound quality from digital audio. It uses Rob
Watts’ (our Digital Design Consultant’s) unique lter technology, the most advanced in the world, to upscale standard 44.1kHz
digital audio up to 705.6kHz (16x CD’s 44.1kHz native resolution), ready to be passed to a suitable DAC; Hugo M Scaler extends its
upscaling performance to 768kHz (from 96kHz input data).”
The Mojo 2 will automatically switch to the source it detects a signal from. If multiple devices are connected and playing
music simultaneously, the Mojo 2 will prioritize the Micro USB, USB C, then the coaxial port, and lastly the optical port.
Connecting Your Headphones or IEMs
Plug your headphones or IEMs into the Mojo 2 via the 2x 3.5mm headphone port.
The Mojo 2 can power two headphones at the same time, but the volume cannot be controlled separately. For this reason
we recommend using similar headphones when two people are listening to the Mojo 2 at the same time.
To Next Page
Loading...
Need help?
General
