Chris-Craft Launch 25 User Manual

2–42 Chris-Craft
Safety and Operations
After fueling:
1. Replace the fuel deck plate. Make sure the cap is tight to prevent water from leaking into the fuel tank.
2. Wipe up any spilled fuel on the deck and surrounding area. Dispose of rags properly.
3. If appropriate, open any hatches, ports, doors, and windows to ventilate the cabin.
4. Investigate for leaks and drips. Make any corrections necessary.
The fuel deck plate cap is fitted with an O-ring that over time may
become worn and/or damaged. Inspect the cap on a regular basis
and replace as necessary.

Chris-Craft Launch 25 Specifications

General

Beam	8 ft 6 in
Fuel Capacity	75 gal (284 L)
Water Capacity	12 gal (45 L)
Maximum Capacity	10 persons
Hull Material	Fiberglass
Passenger Capacity	10 persons
Engine Options	Single or twin engines