Chris-Craft 32 Corsair (RK)

Gary WashingtonAug 19, 2025

What to do if a 12V device is not working on my Chris-Craft Boat?

M
Matthew PaulAug 19, 2025
If a 12V device isn't working, there are a few things you can check. Initially, verify that the circuit breaker for the device is in the OFF position and switch it to ON. If that's not the issue, the battery might be weak or dead; try changing the battery selection switch position (if available) or charge the battery. Lastly, there could be a faulty electrical connection; inspect the 12V connections and tighten or repair them as needed.

Summary

Introduction

The Owner’s Manual

Details the purpose, scope, and recommendations for using the owner's manual.

General Specifications

Provides key dimensions, capacities, and design features of the boat models.

Component Manufacturers

Lists vendors and contact information for major boat components.

Safety and Operations

Safety Signs and Labels

Explains hazard symbols like WARNING, CAUTION, and NOTICE used in the manual.

General Safety Precautions

Offers essential safety advice and best practices for boating activities.

Boating Regulations and Requirements

Covers legal mandates, registration, and safety standards for operating the vessel.

Personal Flotation Devices (PFDs)

Details requirements, types, considerations, and care for PFDs for occupant safety.

Emergency Preparedness

Covers procedures for medical emergencies, carbon monoxide, and man overboard situations.

Fire Safety and Extinguishment

Explains fire classes, extinguisher types, and safe operation of fire suppression systems.

Fueling Safety

Outlines critical safety procedures and precautions to follow during boat fueling.

Systems

Boat Systems Overview

Introduces the various systems covered, commonalities, and differences between models.

Engine Operation and Controls

Details engine starting, stopping, throttles, and instrument interpretation for safe operation.

Electrical System Safety

Emphasizes critical safety measures when working with the boat's AC/DC electrical systems.

Battery System Management

Explains battery types, charging, maintenance, and troubleshooting for reliable power.

Fuel Systems and Safety

Describes the fuel system components and essential safety precautions to prevent fire hazards.

Bilge Pumps

Covers the operation, maintenance, and troubleshooting of the boat's bilge pump systems.

Fresh Water System Operation

Details the fresh water system components, usage, and sanitization procedures.

Trim Tab System Operation

Explains how trim tabs adjust boat angle for optimal performance and ride quality.

Fireboy Fire Suppression System

Details the installation, features, and troubleshooting guide for the Fireboy system.

Marine Sanitation System

Outlines the operation and maintenance of the boat's toilet and waste management system.

Air Conditioning System

Describes the location, components, and operation of the boat's air conditioning system.

Storage and Commissioning

Winter Storage Procedures

Provides a comprehensive checklist for preparing the boat for winter storage.

Spring Commissioning Procedures

Outlines the steps for recommissioning the boat after storage for the season.

Gelcoat Finish Maintenance

Guides on cleaning, stain removal, polishing, and protecting the boat's gelcoat finish.

Teak Deck Maintenance

Details the proper cleaning methods and products for maintaining teak decks.

Engine Winterization Procedures

Covers specific steps for winterizing Mercruiser and Volvo engines to prevent freeze damage.

Appendix A Warranty Information

Chris-Craft Limited Warranty

Details the terms, coverage, exceptions, and duration of the boat's limited warranty.

Customer Problem Resolution

Outlines the process for addressing issues with Chris-Craft products and seeking resolution.

Powertrain Warranty Details

Explains the warranty coverage and responsibility for the boat's powertrain components.

Appendix B Accident Report

Coast Guard Accident Report Form

Provides the official form and instructions for reporting boating accidents.

Accident Details - Boat Information

Details required information about the boat and its safety measures for accident reporting.

Injured People Information

Specifies the data needed regarding injured persons involved in a boating accident.

Appendix C Float Plan

Float Plan Procedure

Explains the importance and components of a float plan for safety during voyages.

Appendix E Maintenance Log

Maintenance Log Forms

Provides forms to document all maintenance actions performed on the vessel for record-keeping.

Appendix F Navigational Aids

Navigational Aids Overview

Explains the purpose and usage of lateral aids to navigation in channels and waterways.

Navigational Aids Chart

Summarizes key navigational signals, including whistle and bridge signals, and storm warnings.

Appendix G Technical Drawings

Technical Drawings Overview

Introduces the appendix containing technical drawings applicable to the boat's systems and components.

Hull Fittings Diagrams

Shows diagrams of port and starboard side thru-hull fittings with dimensions for installation.

Electrical System Diagrams

Includes diagrams for electrical steering, AC panels, and battery switch panel wiring.

Propeller Installation Procedures

Provides step-by-step instructions for installing and removing propellers on Volvo and Mercury drives.

AC Electrical Panel Diagrams

Presents diagrams of the AC electrical panels for US and Euro configurations.

Tecma Toilet Wiring Diagrams

Details the wiring schematics for the Tecma toilet system, including macerator and tank connections.