Safety and Operations
Chris-Craft 2–41
Fueling
Gasoline is very flammable and explosive. The precautions and pro-
cedures in this section are the minimum steps that should be care-
fully and fully observed each time the boat is fueled.
Always follow the manufacturer’s recommendations for grades of
fuel and oil used in your engine. Using improper products may
cause damage to the engine and void your warranty.
General Procedures:
• NEVER smoke or use any flame or ignition device when fueling or around fuel.
• If possible, always fuel during daylight hours.
• Always use fresh fuel. Old fuel can form gum and varnish which may affect engine performance.
• Keep a fire extinguisher nearby.
• All persons not directly involved with the fuel operation should stand clear.
• Ensure engines are stopped and all electrical equipment turned OFF.
• If appropriate, close all hatches, ports, doors, and windows to prevent fumes from entering the cabin.
Think! Have an escape route planned before fueling.
Fueling the boat:
1. Remove the deck plate.
2. Keep the nozzle in contact with the grounded deck plate while filling. This helps prevent static electricity from
creating sparks.
3. Do not over fill. Fuel flowing from the fuel tank vent may spill overboard. Fuel spills violate government regula-
tions and may result in citations. Allow for fuel expansion.
4. NEVER leave the boat during the fueling process.
To Next Page
Loading...
Need help?
General
