How to fix Christie Projector when no image appears on the screen?
If no image is showing on your Christie Projector, verify that all cables and power connections are correctly and securely connected. Also, check if the Light Status LED is green and ensure that you have removed the lens cap and the projector is switched on.
What to do if the image is out of focus on my Christie Projector?
If the image on your Christie Projector is out of focus, first ensure that both front and back lens caps are removed. Then, adjust the lens focus until the image fits the screen. Also, verify that the projection screen is within the required distance for optimal focus.
How to correct an incorrectly displayed image on a Christie 140-133108?
If the image on your Christie Projector is displayed incorrectly, try the following: 1. Press AUTO on the control panel or IR remote. 2. Ensure your display resolution setting is lower than or equal to WUXGA (1920 × 1200). 3. If using a Notebook, press AUTO. 4. Adjust the resolution of the computer. 5. Restart all equipment including the projector.
To Next Page
General