Need help?Do you have a question about the Christie Solaria One+ and is the answer not in the manual?
General| Type | Digital Cinema Projector |
|---|---|
| Contrast Ratio | 2000:1 |
| Lamp Type | Xenon |
| Resolution | 2048 x 1080 (2K) |
| Brightness | 10, 000 lumens |
| Color | Full Color |
| 3D | Yes |
| Native Resolution | 2048 x 1080 |
| Projection Technology | DLP |
| Lens Options | Interchangeable lenses |
| Input Connectors | Ethernet |
Essential safety precautions and warnings for operating and servicing the projector.
Contact information and resources for obtaining technical assistance from Christie.
Procedure for adjusting the integrator rod rotation for proper image focus and illumination.
Steps to correct missing image corners or edges by aligning the fold mirror.
Procedure for adjusting the vertical boresight to ensure uniform image focus across the screen.
Procedure for adjusting the horizontal boresight for precise image alignment and focus.
Calibrating the yellow notch filter for accurate color representation using a spectroradiometer.
Steps to adjust the lamp position for optimal light output and image quality.
Procedure for aligning the three DMD panels for accurate color representation and pixel alignment.
Procedure for checking and maintaining the card cage air filter for optimal performance.
Instructions for inspecting the air filter within the light engine compartment.
Instructions for removing the safety shield to access the lamp reflector.
Detailed procedure for safely replacing the projector lamp, including safety warnings.
Steps to safely remove the old projector lamp.
Procedure for safely removing the projector lens.
Procedure for replacing the projector's standby power supply.
Steps to remove the low voltage power supply (LVPS).
Procedure for replacing the lamp power supply (LPS).
Procedure for removing and replacing the projector's light engine assembly.
Procedure for installing software upgrades on the projector.
How to back up projector configuration and operational data.
Troubleshooting common issues related to projector power and TPC operation.
Steps to diagnose and resolve issues when the projector fails to power on.
Diagnosing and resolving communication problems between devices.
Troubleshooting projector startup issues from standby mode.
Troubleshooting issues related to the projector lamp not igniting or turning off.
Steps to diagnose why the projector lamp fails to ignite.
Troubleshooting reasons for the projector lamp unexpectedly turning off.
Troubleshooting common display problems like no image, flicker, or artifacts.
Steps to resolve issues where no image is displayed by the projector.
Troubleshooting causes of image flicker, shadows, or reduced brightness.
Resolving issues causing a blank screen or no cinema image display.
Troubleshooting information for the Christie Integrated Media Block (IMB).
To Next Page
