Christie Solaria One+ Instruction Sheet

Retrofitting the Solaria
One with the GDC
SR-1000 IMB
This document describes the steps for installing an integrated media block (IMB) faceplate retrofit kit,
allowing the use of the GDC SR-1000 third party IMB in Solaria One series projectors.
Affected products
These instructions apply to the following products
• Christie Solaria One
• Christie Solaria One+
Prerequisites
The following components are required to complete the installation.
• ASSY SR-1000 IMB (P/N: 003-121741-XX)—GDC-SO-1804-012 SR-1000 Standalone
Integrated Media Block
• Solaria SR-1000 kit (P/N: 003-108430-XX) containing the following components:
• Faceplate (QTY: 1)
• Support Bracket (QTY: 1)
• Backer Bracket (QTY: 1)
• EMI gaskets (QTY: 2)
• Phillips screws 4-40 (QTY: 2)
• Locking nuts 4-40 (QTY:2)
• Void warranty label (QTY: 1)
• Screw M3 Hex (QTY: 3)
• Electrostatic discharge bag (QTY: 1)
Retrofitting the Solaria One with the GDC SR-1000 IMB Instruction Sheet 1
020-102945-03 Rev. 1 (05-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.

Christie Solaria One+ Specifications

General

Type	Digital Cinema Projector
Contrast Ratio	2000:1
Lamp Type	Xenon
Resolution	2048 x 1080 (2K)
Brightness	10, 000 lumens
Color	Full Color
3D	Yes
Native Resolution	2048 x 1080
Projection Technology	DLP
Lens Options	Interchangeable lenses
Input Connectors	Ethernet