Christie Solaria One+ Retrofitting Guide

Retrofitting the Solaria
One projector with a
Dolby IMS3000 IMB
This document describes the steps for installing an integr
ated media block (IMB) faceplate retrofit kit,
allowing the use of the Dolby IMS3000 third party IMB in Solaria One series projectors.
Affected products
These instructions apply to the following products
• Christie Solaria One
• Christie Solaria One+
Prerequisites
The following components are required to complete the installation.
• 003-109982-01 Kit Solaria IMS3000, containing the following components:
• Faceplate (QTY: 1)
• EMI gaskets (QTY: 2)
• IMS3000 support bracket (QTY: 1)
• Void warranty label (QTY: 1)
• Electrostatic discharge bag (QTY: 1)
Installing the Christie Solaria One IMS3000 IMB Faceplate Kit Instruction Sheet 1
020-103421-02 R
ev. 1 (11-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.

Christie Solaria One+ Specifications

General

Type	Digital Cinema Projector
Contrast Ratio	2000:1
Lamp Type	Xenon
Resolution	2048 x 1080 (2K)
Brightness	10, 000 lumens
Color	Full Color
3D	Yes
Native Resolution	2048 x 1080
Projection Technology	DLP
Lens Options	Interchangeable lenses
Input Connectors	Ethernet