Need help?Do you have a question about the Christie Roadster S+16K and is the answer not in the manual?
General| Technology | 3-chip DLP |
|---|---|
| Contrast Ratio (full on/off) | 2000:1 |
| Brightness | 16000 ANSI Lumens |
| Contrast Ratio | 2000:1 (full on/off) |
| Lamp Type | Xenon |
| Native Resolution | 1920x1200 (WUXGA) |
| Resolution | 1920x1200 (WUXGA) |
Overview of the Roadster and Mirage S+/HD series projectors and their key features.
Details the standard and optional components included with the projector.
Instructions for filling out purchase records and registering the projector's warranty.
Provides step-by-step instructions for a fast projector setup in a standard floor mount.
Discusses issues to consider before final installation, including lifting and stacking.
Explains how to connect various signal sources to the projector's input panel.
Details how to connect the projector to the AC power supply and important safety notes.
Provides instructions for adjusting lens zoom, focus, and image position.
Covers fundamental projector functions and adjustments via keypad commands and menus.
Explains how to use the built-in and remote keypads to control projector functions.
Guides on accessing and operating the projector's menu system for adjustments.
Details how to select and manage input sources and stored display configurations (channels).
Covers image adjustments like size, position, aspect ratio, and color settings.
Instructions for managing lamp settings, hours, and replacement procedures.
Describes common error messages, causes, and remedies for projector malfunctions.
Provides essential safety warnings and guidelines for operating and maintaining the projector.
Instructions for safely cleaning projector components like the lens, lamp, and covers.
Step-by-step guide for safely replacing the projector's lamp module and filter.
Procedure for safely removing and installing different projector lenses.
Troubleshooting common display issues such as blank screens, incorrect black levels, or distorted images.
Troubleshooting common lamp issues like failure to ignite, sudden shutoff, or dimness.
Details the projector's pixel resolution and supported refresh rates.
Specifies projector brightness measurements in ANSI lumens across different models.
Lists the available input types and connector specifications for the projector.
Provides electrical specifications including voltage, current, power consumption, and line cords.
The ratio of image width to height, affecting how the image fills the screen.
Measures the amount of light emitted by the projector's surface, usually the screen.
Describes the coloration of white in an image, measured in Kelvin degrees.
The distance between projector feet and screen, crucial for image size calculation.
Reference guide detailing the functions of the projector's remote control keypad.
Information on connecting the projector using RS232 serial communication cables.
Guide on how to calculate the correct throw distance based on screen size and lens.
Provides formulas and tables for calculating throw distances for various lenses.
Explains how to configure the General Purpose Input/Output connector for automation.
Details the Dual SD/HD-SDI module for tiling and distributing digital video signals.
Describes the Serial Digital Input Module for receiving and looping serial digital video signals.
To Next Page
