Need help?Do you have a question about the Christie Solaria One and is the answer not in the manual?
Important safety rules to avoid personal injury or projector damage during installation.
Guidelines for using the AC power cord and supply safely.
Ensuring correct power cord and attachment usage for regional standards.
Safety warnings and procedures for handling projector lamps.
Identification and description of front-mounted projector components.
Identification and description of rear-mounted projector components.
Instructions for safely positioning the projector for installation.
Procedure for stacking multiple Solaria One projectors using a kit.
How to adjust projector feet for optimal height and leveling.
Step-by-step guide for installing the projector's touch panel controller.
Instructions for installing the projector lens, including surround and clamp.
Procedure for installing a projector lamp, emphasizing safety and technician requirements.
Connecting external devices to the projector for content playback.
Overview of projector connection ports and their functions.
Steps to connect the projector to a computer via Ethernet or RS232.
Procedure for connecting the projector to NAS devices using NFS protocol.
Steps to connect the projector to DAS devices via eSATA ports.
Connecting the projector to a digital cinema audio processor via AES3 port.
Connecting devices for 3D synchronization.
Instructions for connecting the projector to AC power, including grounding.
Procedure for powering on the projector using the touch panel controller.
Steps for logging into the projector using the touch panel controller.
Process for completing projector marriage for encrypted content and DCI compliance.
Configuring network settings to add the projector to a network.
Recording lamp usage details in the projector's lamp history.
Procedure to turn the projector lamp on using the touch panel controller.
Adjusting the projector lamp for optimal light output and alignment.
Procedure to adjust the projected image to fit the screen dimensions.
Steps for aligning images from two stacked projectors horizontally and vertically.
Installing RealD 3D EQ configuration files for 3D content display.
Tasks typically completed after configuration to play content.
Methods to correct keystone effect in projected images.
Correcting horizontal keystone issues in dual projector setups.
Correcting vertical keystone issues in dual projector setups.
Addressing images that are brighter at the center than at the sides.
Procedure for adjusting the vertical boresight angle of the projector lens.
Procedure for adjusting the horizontal boresight of the projector lens.
Correcting color misalignment issues in projected images.
Adjusting the fold mirror to correct missing image corners or edges.
Creating MCGD files to correct on-screen colors using a colorimeter.
Using masking to conceal unused edges of a screen for image adjustment.
Calibrating screen brightness to Foot Lamberts using a wizard.
Overview and functionality of the projector's touch panel controller.
Navigating the main screen of the Touch Panel Controller for settings.
Steps to log on to the projector using user credentials.
Checking the operational status of various projector components.
Capturing diagnostic information for service personnel.
Accessing and downloading system logs for troubleshooting.
Performing a server test to check subtitle and metadata files.
Acknowledging and managing projector alarms.
Procedure for safely powering off the projector and its lamp.
Recommended procedure to stop DLP communication during maintenance.
Resetting the DLP to remove image artifacts before restarting.
Performing a self-test to check ICP and DLP functionality.
Downloading an ICP certificate to a USB drive or FTP root directory.
Disabling the ICP signature test to prevent network monitoring disruption.
Creating customized projector settings for different inputs.
Activating a saved channel configuration for specific inputs.
Restoring default settings for the current or all channels.
Customizing the icon associated with a specific channel.
Managing channels displayed in the Touch Panel Controller's preferred pane.
Creating custom lamp files with Power% and LiteLOC settings.
Editing settings within an existing projector lamp file.
Configuring the LiteLOC power control algorithm for lamp files.
Setting the lamp power percentage and enabling LiteLOC.
Temporarily adjusting lamp power percentage, overriding LiteLOC.
Accessing information about previously installed projector lamps.
Setting up alarms for when a projector lamp reaches its operational limit.
Table listing maximum projector lamp hours before replacement.
Lists minimum and maximum power settings for different projector lamps.
Recording details of a newly installed lamp into the history.
Checking the current light intensity value of the projector lamp.
Creating files to store resolution, offset, and aspect ratio for inputs.
Editing resolution, offset, or aspect ratio values in a source file.
Defining display panel size and image cropping using screen files.
Editing settings within an existing screen file.
Creating Measured Color Gamut Data files for on-screen color correction.
Editing settings within an existing MCGD file.
Creating Target Color Gamut Data files based on content provider definitions.
Editing settings within an existing TCGD file.
Scheduling projector power on/off events on a daily or weekly basis.
Modifying existing scheduled events for projector power management.
Removing a specific scheduled event from the projector's calendar.
Clearing all scheduled events from the projector.
Disabling the projector's scheduling feature.
Adjusting general projector and Touch Panel Controller preferences.
Configuring time zone, 24-hour format, and daylight saving adjustments.
Configuring network and serial communication settings.
Adding network devices to the projector's network configuration.
Interacting with configured network devices.
Calibrating the projector's internal light meter to Foot Lamberts.
Viewing running programs and processes on the projector.
Managing local or remote computer settings via Windows console.
Browsing the projector's file system structure.
Viewing and modifying network connection settings.
Displaying serial number, software, DLP, lens, and lamp information.
Entering and saving the serial number for the installed projector lens.
Table detailing permissions for different user access levels.
Creating new user accounts with specific access permissions.
Modifying passwords or access rights for existing user accounts.
Removing user accounts from the projector system.
Uploading software upgrade packages to the projector.
Deleting previously uploaded software upgrade files.
Installing software upgrades, with options for component or full installs.
Creating a backup of projector configuration and operational data.
Restoring configuration, preference, channel, or ICP files.
Resetting all projector settings to their original factory defaults.
Transferring files from a USB drive to the projector's storage.
Removing files from the projector's storage.
Customizing the list of preferred test patterns for display.
Selecting and activating or deactivating test patterns.
Displaying a selected test pattern in full screen mode.
Managing content playback and selection on the Christie IMB.
Using playback controls for content, playlists, and time seek.
Explanation of icons used in the Local Content list.
Loading content files or playlists for playback.
Setting content to loop continuously during playback.
Removing loaded content from the Christie IMB.
Viewing content stored on the IMB, identifying expired or soon-to-expire items.
Accessing detailed information about locally stored content items.
Updating the list of content stored locally on the IMB.
Removing locally stored content items from the IMB.
Displaying all available encryption keys for content management.
Filtering and viewing encryption keys that have expired.
Filtering and viewing encryption keys that expire today.
Filtering and viewing encryption keys that are not yet valid.
Updating the list of available encryption keys.
Removing a specific encryption key from the IMB.
Removing all currently displayed encryption keys.
Viewing content available for ingestion onto the IMB.
Procedure for ingesting movie content and its encryption key.
Updating the list of content available for ingestion.
Monitoring the progress of content ingestion.
Updating the status list for content ingestion.
Managing lists of content files and automated events for playback.
Selecting and viewing a pre-defined playlist.
Importing playlists from external storage.
Creating new playlists for organizing content playback.
Exporting playlists for use on other projectors.
Duplicating an existing playlist.
Changing the name of an existing playlist.
Adding content items to a specific playlist timeline.
Rearranging the sequence of content within a playlist.
Checking the playback status of items within a playlist.
Deleting content items from a playlist.
Integrating macros or input cues into a playlist for automated actions.
Adjusting the timing of automation events within a playlist.
Deleting automation entries from a playlist.
Removing an entire playlist from the system.
Viewing and managing content schedules in calendar or day views.
Displaying the content schedule in a monthly calendar format.
Viewing and modifying content schedules on a daily basis.
Adding content or playlists to the daily schedule.
Modifying the content, date, or time of a scheduled item.
Duplicating an existing scheduled item to another date.
Duplicating an entire day's schedule to another date.
Removing a specific item from the daily schedule.
Clearing all scheduled items for a specific day.
Controlling whether scheduled items play automatically.
Switching the schedule view to the calendar format.
Procedures for managing various Christie IMB settings.
Rebooting the Christie IMB server for troubleshooting.
Downloading certificates for IMB feature activation.
Running a system interrogation to capture diagnostic data.
Deleting unused or orphaned assets from the content drive.
Resetting IMB settings to factory defaults.
Checking the operational status of the Christie IMB.
Installing licenses to activate Christie IMB features.
Backing up and restoring IMB configuration and content data.
Restoring IMB files from an external USB drive.
Generating a backup file of the Christie IMB configuration.
Downloading a backup file from the IMB to a USB drive.
Removing backup files from the Christie IMB.
Loading and managing configuration files for third-party software.
Loading RealD 3D EQ configuration files for 3D display.
Loading default RealD 3D EQ configuration files.
Connecting and managing NAS and DAS storage devices for content.
Connecting and configuring Direct Attached Storage (DAS) devices.
Modifying the configuration settings for DAS devices.
Removing DAS devices from the IMB configuration.
Connecting and configuring Network Attached Storage (NAS) devices.
Modifying the configuration settings for NAS devices.
Verifying the network connection to NAS devices.
Testing the performance of NAS connections for content streaming.
Updating the list of available network shares for NAS devices.
Setting static IP addresses for NAS Ethernet ports on the IMB.
Removing NAS devices from the IMB configuration.
Setting up and managing automation signals from external devices.
Adding external devices for automation control.
Verifying communication with configured automation devices.
Deleting configured automation devices.
Creating macros, which are lists of defined actions.
Adding specific actions or activities to a macro.
Modifying the settings of activities within a macro.
Rearranging the sequence of activities within a macro.
Deleting an activity from a macro.
Deleting a macro from the system.
Adding input cues to wait for events or trigger macros.
Modifying the settings for input cues.
Deleting input cues from the system.
Creating global triggers that combine input cues with macros.
Modifying the settings for global triggers.
Deleting global triggers from the system.
Configuring audio output and speaker mapping.
Mapping digital cinema audio processor channel outputs to speakers.
Associating speaker names with specific AES outputs and delays.
Upgrading Christie IMB and projector software separately.
Uploading new software packages for the Christie IMB.
Installing uploaded software upgrades onto the Christie IMB.
Removing software upgrade files from the IMB.
Using logs to identify and troubleshoot Christie IMB performance issues.
Retrieving Screen Management System (SMS) logs.
Retrieving Security Manager (SM) logs and reports.
Viewing detailed information for specific log entries.
Downloading SMS or SM logs to a USB flash device.
Downloading SM reports that meet SMPTE standards.
Clearing the log list displayed on the screen.
Items required to display 3D images with the Solaria One projector.
Pin mapping for the 15-pin D-sub 3D sync terminal.
Setting up hardware for active glasses and polarizing screens.
Steps for setting up dual projectors for 3D playback.
Creating files for displaying content with high frame rates.
Adjusting the default 3D lamp file for 3D hardware specifications.
Creating MCGD files to match 3D hardware specifications.
Configuring settings for the 3D Flat 1998x1080 channel.
Configuring settings for the 3D Scope 2048x858 channel.
Using test patterns to verify 3D hardware functionality.
Checking left and right eye display for 3D cinema content.
Resolving common issues related to 3D content playback.
Checking projector vents and louvers for proper airflow.
Safety precautions and checks for projector lamp connections.
Procedures for inspecting and cleaning projector lenses safely.
Detailed steps for removing dust or fingerprints from the lens.
Safety warnings and procedures for replacing the projector lamp.
Steps to safely remove the current projector lamp.
Procedure for installing a new projector lamp.
Instructions for replacing the projector's card cage air filter.
Procedure for replacing the light engine compartment filter.
Step-by-step guide for removing and installing projector lenses.
Troubleshooting common issues with projector power and functionality.
Diagnosing and resolving issues with the projector lamp not igniting or turning off.
Resolving common display problems like flicker, shadows, or blank screens.
Troubleshooting common issues related to the Christie Integrated Media Block.
Specifications related to the projector's display panel and refresh rate.
Details on pixel format and processing path for the display.
Brightness specifications for different lamp models.
Contrast ratio specifications for the projector.
Specifications for displayable colors and gray scale resolution.
Nominal white point coordinates for the projector.
Nominal gamma correction values for theater mode.
Compatibility information for various control signal interfaces.
Specifications for the Ethernet port interface and bit rate.
Specifications for the RS232-PIB interface, including bit rate and protocol.
Specifications for the proprietary 3D terminal interface.
Specifications for the projector's touch panel controller.
Details on AC input voltage, current, and power consumption.
AC input voltage range, line frequency, and current consumption.
Specifications for the UPS AC input connector and type.
Specifications for the Xenon Short Arc Lamp, including power and life.
Dimensions, weight, and operating position specifications.
Conformity to safety, environmental, and EMC regulations.
List of safety standards the product conforms to.
EMC specifications including emissions and immunity.
Compliance with EU directives for hazardous substances and waste.
Product markings conforming to Canadian, US, and European directives.
Compliance with RoHS, WEEE, and REACH regulations.
Operating and non-operating environmental conditions.
Temperature, humidity, and altitude ranges for operation.
Temperature and humidity ranges for non-operating conditions.
List of standard accessories included with the product.
List of standard items included with the projector.
List of optional accessories available for the projector.
Technical specifications for the Christie Integrated Media Block.
IMB support for 2D video cinema formats.
IMB support for 3D video cinema formats and frame rate performance.
List of audio formats supported by the Christie IMB.
Pin mapping details for the AES3 audio output port.
Minimum requirements for Network Attached Storage (NAS) devices.
Specifications for the IMB's Ethernet port.
Specifications for the IMB's eSATA interface.
Specifications for the IMB's USB 2.0 port.
Specifications for the IMB's AES3 digital audio output.
Christie IMB security policy requirements based on FIPS 140-2.
Information on the IMB's anti-tamper monitoring and security module.
Important safety rules to avoid personal injury or projector damage during installation.
Guidelines for using the AC power cord and supply safely.
Ensuring correct power cord and attachment usage for regional standards.
Safety warnings and procedures for handling projector lamps.
Identification and description of front-mounted projector components.
Identification and description of rear-mounted projector components.
Instructions for safely positioning the projector for installation.
Procedure for stacking multiple Solaria One projectors using a kit.
How to adjust projector feet for optimal height and leveling.
Step-by-step guide for installing the projector's touch panel controller.
Instructions for installing the projector lens, including surround and clamp.
Procedure for installing a projector lamp, emphasizing safety and technician requirements.
Connecting external devices to the projector for content playback.
Overview of projector connection ports and their functions.
Steps to connect the projector to a computer via Ethernet or RS232.
Procedure for connecting the projector to NAS devices using NFS protocol.
Steps to connect the projector to DAS devices via eSATA ports.
Connecting the projector to a digital cinema audio processor via AES3 port.
Connecting devices for 3D synchronization.
Instructions for connecting the projector to AC power, including grounding.
Procedure for powering on the projector using the touch panel controller.
Steps for logging into the projector using the touch panel controller.
Process for completing projector marriage for encrypted content and DCI compliance.
Configuring network settings to add the projector to a network.
Recording lamp usage details in the projector's lamp history.
Procedure to turn the projector lamp on using the touch panel controller.
Adjusting the projector lamp for optimal light output and alignment.
Procedure to adjust the projected image to fit the screen dimensions.
Steps for aligning images from two stacked projectors horizontally and vertically.
Installing RealD 3D EQ configuration files for 3D content display.
Tasks typically completed after configuration to play content.
Methods to correct keystone effect in projected images.
Correcting horizontal keystone issues in dual projector setups.
Correcting vertical keystone issues in dual projector setups.
Addressing images that are brighter at the center than at the sides.
Procedure for adjusting the vertical boresight angle of the projector lens.
Procedure for adjusting the horizontal boresight of the projector lens.
Correcting color misalignment issues in projected images.
Adjusting the fold mirror to correct missing image corners or edges.
Creating MCGD files to correct on-screen colors using a colorimeter.
Using masking to conceal unused edges of a screen for image adjustment.
Calibrating screen brightness to Foot Lamberts using a wizard.
Overview and functionality of the projector's touch panel controller.
Navigating the main screen of the Touch Panel Controller for settings.
Steps to log on to the projector using user credentials.
Checking the operational status of various projector components.
Capturing diagnostic information for service personnel.
Accessing and downloading system logs for troubleshooting.
Performing a server test to check subtitle and metadata files.
Acknowledging and managing projector alarms.
Procedure for safely powering off the projector and its lamp.
Recommended procedure to stop DLP communication during maintenance.
Resetting the DLP to remove image artifacts before restarting.
Performing a self-test to check ICP and DLP functionality.
Downloading an ICP certificate to a USB drive or FTP root directory.
Disabling the ICP signature test to prevent network monitoring disruption.
Creating customized projector settings for different inputs.
Activating a saved channel configuration for specific inputs.
Restoring default settings for the current or all channels.
Customizing the icon associated with a specific channel.
Managing channels displayed in the Touch Panel Controller's preferred pane.
Creating custom lamp files with Power% and LiteLOC settings.
Editing settings within an existing projector lamp file.
Configuring the LiteLOC power control algorithm for lamp files.
Setting the lamp power percentage and enabling LiteLOC.
Temporarily adjusting lamp power percentage, overriding LiteLOC.
Accessing information about previously installed projector lamps.
Setting up alarms for when a projector lamp reaches its operational limit.
Table listing maximum projector lamp hours before replacement.
Lists minimum and maximum power settings for different projector lamps.
Recording details of a newly installed lamp into the history.
Checking the current light intensity value of the projector lamp.
Creating files to store resolution, offset, and aspect ratio for inputs.
Editing resolution, offset, or aspect ratio values in a source file.
Defining display panel size and image cropping using screen files.
Editing settings within an existing screen file.
Creating Measured Color Gamut Data files for on-screen color correction.
Editing settings within an existing MCGD file.
Creating Target Color Gamut Data files based on content provider definitions.
Editing settings within an existing TCGD file.
Scheduling projector power on/off events on a daily or weekly basis.
Modifying existing scheduled events for projector power management.
Removing a specific scheduled event from the projector's calendar.
Clearing all scheduled events from the projector.
Disabling the projector's scheduling feature.
Adjusting general projector and Touch Panel Controller preferences.
Configuring time zone, 24-hour format, and daylight saving adjustments.
Configuring network and serial communication settings.
Adding network devices to the projector's network configuration.
Interacting with configured network devices.
Calibrating the projector's internal light meter to Foot Lamberts.
Viewing running programs and processes on the projector.
Managing local or remote computer settings via Windows console.
Browsing the projector's file system structure.
Viewing and modifying network connection settings.
Displaying serial number, software, DLP, lens, and lamp information.
Entering and saving the serial number for the installed projector lens.
Table detailing permissions for different user access levels.
Creating new user accounts with specific access permissions.
Modifying passwords or access rights for existing user accounts.
Removing user accounts from the projector system.
Uploading software upgrade packages to the projector.
Deleting previously uploaded software upgrade files.
Installing software upgrades, with options for component or full installs.
Creating a backup of projector configuration and operational data.
Restoring configuration, preference, channel, or ICP files.
Resetting all projector settings to their original factory defaults.
Transferring files from a USB drive to the projector's storage.
Removing files from the projector's storage.
Customizing the list of preferred test patterns for display.
Selecting and activating or deactivating test patterns.
Displaying a selected test pattern in full screen mode.
Managing content playback and selection on the Christie IMB.
Using playback controls for content, playlists, and time seek.
Explanation of icons used in the Local Content list.
Loading content files or playlists for playback.
Setting content to loop continuously during playback.
Removing loaded content from the Christie IMB.
Viewing content stored on the IMB, identifying expired or soon-to-expire items.
Accessing detailed information about locally stored content items.
Updating the list of content stored locally on the IMB.
Removing locally stored content items from the IMB.
Displaying all available encryption keys for content management.
Filtering and viewing encryption keys that have expired.
Filtering and viewing encryption keys that expire today.
Filtering and viewing encryption keys that are not yet valid.
Updating the list of available encryption keys.
Removing a specific encryption key from the IMB.
Removing all currently displayed encryption keys.
Viewing content available for ingestion onto the IMB.
Procedure for ingesting movie content and its encryption key.
Updating the list of content available for ingestion.
Monitoring the progress of content ingestion.
Updating the status list for content ingestion.
Managing lists of content files and automated events for playback.
Selecting and viewing a pre-defined playlist.
Importing playlists from external storage.
Creating new playlists for organizing content playback.
Exporting playlists for use on other projectors.
Duplicating an existing playlist.
Changing the name of an existing playlist.
Adding content items to a specific playlist timeline.
Rearranging the sequence of content within a playlist.
Checking the playback status of items within a playlist.
Deleting content items from a playlist.
Integrating macros or input cues into a playlist for automated actions.
Adjusting the timing of automation events within a playlist.
Deleting automation entries from a playlist.
Removing an entire playlist from the system.
Viewing and managing content schedules in calendar or day views.
Displaying the content schedule in a monthly calendar format.
Viewing and modifying content schedules on a daily basis.
Adding content or playlists to the daily schedule.
Modifying the content, date, or time of a scheduled item.
Duplicating an existing scheduled item to another date.
Duplicating an entire day's schedule to another date.
Removing a specific item from the daily schedule.
Clearing all scheduled items for a specific day.
Controlling whether scheduled items play automatically.
Switching the schedule view to the calendar format.
Procedures for managing various Christie IMB settings.
Rebooting the Christie IMB server for troubleshooting.
Downloading certificates for IMB feature activation.
Running a system interrogation to capture diagnostic data.
Deleting unused or orphaned assets from the content drive.
Resetting IMB settings to factory defaults.
Checking the operational status of the Christie IMB.
Installing licenses to activate Christie IMB features.
Backing up and restoring IMB configuration and content data.
Restoring IMB files from an external USB drive.
Generating a backup file of the Christie IMB configuration.
Downloading a backup file from the IMB to a USB drive.
Removing backup files from the Christie IMB.
Loading and managing configuration files for third-party software.
Loading RealD 3D EQ configuration files for 3D display.
Loading default RealD 3D EQ configuration files.
Connecting and managing NAS and DAS storage devices for content.
Connecting and configuring Direct Attached Storage (DAS) devices.
Modifying the configuration settings for DAS devices.
Removing DAS devices from the IMB configuration.
Connecting and configuring Network Attached Storage (NAS) devices.
Modifying the configuration settings for NAS devices.
Verifying the network connection to NAS devices.
Testing the performance of NAS connections for content streaming.
Updating the list of available network shares for NAS devices.
Setting static IP addresses for NAS Ethernet ports on the IMB.
Removing NAS devices from the IMB configuration.
Setting up and managing automation signals from external devices.
Adding external devices for automation control.
Verifying communication with configured automation devices.
Deleting configured automation devices.
Creating macros, which are lists of defined actions.
Adding specific actions or activities to a macro.
Modifying the settings of activities within a macro.
Rearranging the sequence of activities within a macro.
Deleting an activity from a macro.
Deleting a macro from the system.
Adding input cues to wait for events or trigger macros.
Modifying the settings for input cues.
Deleting input cues from the system.
Creating global triggers that combine input cues with macros.
Modifying the settings for global triggers.
Deleting global triggers from the system.
Configuring audio output and speaker mapping.
Mapping digital cinema audio processor channel outputs to speakers.
Associating speaker names with specific AES outputs and delays.
Upgrading Christie IMB and projector software separately.
Uploading new software packages for the Christie IMB.
Installing uploaded software upgrades onto the Christie IMB.
Removing software upgrade files from the IMB.
Using logs to identify and troubleshoot Christie IMB performance issues.
Retrieving Screen Management System (SMS) logs.
Retrieving Security Manager (SM) logs and reports.
Viewing detailed information for specific log entries.
Downloading SMS or SM logs to a USB flash device.
Downloading SM reports that meet SMPTE standards.
Clearing the log list displayed on the screen.
Items required to display 3D images with the Solaria One projector.
Pin mapping for the 15-pin D-sub 3D sync terminal.
Setting up hardware for active glasses and polarizing screens.
Steps for setting up dual projectors for 3D playback.
Creating files for displaying content with high frame rates.
Adjusting the default 3D lamp file for 3D hardware specifications.
Creating MCGD files to match 3D hardware specifications.
Configuring settings for the 3D Flat 1998x1080 channel.
Configuring settings for the 3D Scope 2048x858 channel.
Using test patterns to verify 3D hardware functionality.
Checking left and right eye display for 3D cinema content.
Resolving common issues related to 3D content playback.
Checking projector vents and louvers for proper airflow.
Safety precautions and checks for projector lamp connections.
Procedures for inspecting and cleaning projector lenses safely.
Detailed steps for removing dust or fingerprints from the lens.
Safety warnings and procedures for replacing the projector lamp.
Steps to safely remove the current projector lamp.
Procedure for installing a new projector lamp.
Instructions for replacing the projector's card cage air filter.
Procedure for replacing the light engine compartment filter.
Step-by-step guide for removing and installing projector lenses.
Troubleshooting common issues with projector power and functionality.
Diagnosing and resolving issues with the projector lamp not igniting or turning off.
Resolving common display problems like flicker, shadows, or blank screens.
Troubleshooting common issues related to the Christie Integrated Media Block.
Specifications related to the projector's display panel and refresh rate.
Details on pixel format and processing path for the display.
Brightness specifications for different lamp models.
Contrast ratio specifications for the projector.
Specifications for displayable colors and gray scale resolution.
Nominal white point coordinates for the projector.
Nominal gamma correction values for theater mode.
Compatibility information for various control signal interfaces.
Specifications for the Ethernet port interface and bit rate.
Specifications for the RS232-PIB interface, including bit rate and protocol.
Specifications for the proprietary 3D terminal interface.
Specifications for the projector's touch panel controller.
Details on AC input voltage, current, and power consumption.
AC input voltage range, line frequency, and current consumption.
Specifications for the UPS AC input connector and type.
Specifications for the Xenon Short Arc Lamp, including power and life.
Dimensions, weight, and operating position specifications.
Conformity to safety, environmental, and EMC regulations.
List of safety standards the product conforms to.
EMC specifications including emissions and immunity.
Compliance with EU directives for hazardous substances and waste.
Product markings conforming to Canadian, US, and European directives.
Compliance with RoHS, WEEE, and REACH regulations.
Operating and non-operating environmental conditions.
Temperature, humidity, and altitude ranges for operation.
Temperature and humidity ranges for non-operating conditions.
List of standard accessories included with the product.
List of standard items included with the projector.
List of optional accessories available for the projector.
Technical specifications for the Christie Integrated Media Block.
IMB support for 2D video cinema formats.
IMB support for 3D video cinema formats and frame rate performance.
List of audio formats supported by the Christie IMB.
Pin mapping details for the AES3 audio output port.
Minimum requirements for Network Attached Storage (NAS) devices.
Specifications for the IMB's Ethernet port.
Specifications for the IMB's eSATA interface.
Specifications for the IMB's USB 2.0 port.
Specifications for the IMB's AES3 digital audio output.
Christie IMB security policy requirements based on FIPS 140-2.
Information on the IMB's anti-tamper monitoring and security module.
General| Type | DLP |
|---|---|
| Contrast Ratio | 2000:1 |
| Resolution | 1920 x 1080 |
| Lamp Type | Xenon |
| Illumination Technology | DLP |
| Input Connectors | HDMI, DVI, VGA |
To Next Page
