How to turn off AV MUTE on a Christie Projector?
If your Christie Projector is outputting neither sound nor pictures, and the AV MUTE function is active, press the AV MUTE button on the remote control.
How do I stop flickering or stripes on my Christie LW551i Projector screen in Eco mode?
If you see image degradation such as flickering or stripes on the screen of your Christie Projector while it's in Eco mode, set ECO MODE to NORMAL and AUTO ECO MODE to OFF in the SETUP menu.
Why are the pictures on my Christie LW551i Projector dark in Eco mode?
If the pictures on your Christie Projector appear dark, and it is operating in Eco mode, set ECO MODE to NORMAL, and set AUTO ECO MODE to OFF in the SETUP menu.
How to fix faded or poor colors on Christie LW551i Projector?
If the colors on your Christie Projector appear faded or the color tone is poor, adjust the COLOR TEMP, COLOR, and/or TINT settings using the menu functions.
How do I fix mismatched input changeover settings on my Christie LW551i Projector?
If your Christie Projector outputs neither sounds nor pictures due to mismatched input changeover settings, select the correct input signal and adjust the settings accordingly.
What does 'improper signal input' mean on my Christie Projector and how do I fix it?
If your Christie Projector indicates an improper signal input, confirm the specifications for your projector or the signal source specifications.
How do I resolve horizontal or vertical frequency issues with my Christie LW551i?
If the horizontal or vertical frequency of the input signal is not within the specified range for your Christie Projector, confirm the specifications for your projector or the signal source specifications.
Why are the buttons on my Christie Projector not working?
If button operations are unavailable on your Christie Projector, check the button you are trying to use. Note that all button operations are unavailable while the lens is moving or when all input ports are set to 'SKIP'.
How do I troubleshoot my Christie LW551i when neither sounds nor pictures are outputted and the signal source isn't working correctly?
If your Christie Projector is outputting neither sound nor pictures, and the signal source isn't working correctly, set up the signal source device correctly by referring to its manual.
How do I fix blurry pictures on my Christie LW551i Projector?
If the pictures on your Christie Projector appear blurry, adjust the focus and/or horizontal phase settings.
General| Brightness | 5500 ANSI Lumens |
|---|---|
| Weight | 13.2 kg (29.1 lbs) |
| Projection Technology | 3LCD |
| Light Source | Lamp |
| Resolution | 1920 x 1200 |
| Contrast Ratio | 10000:1 |
| Lens Shift | Vertical: ±60%, Horizontal: no identical values |
| Input Connectors | HDMI, VGA, Composite |
Lists the projector's key capabilities and advantages for various uses.
Verifies the items included with the projector to ensure completeness.
Provides details about the manual structure and acknowledges registered trademarks.
Identifies the physical components of the projector, including ports and controls.
Identifies the buttons and features of the projector's remote control.
Safety guidelines for handling the projector and its parts to prevent damage or injury.
Guides on placing the projector for optimal use and screen alignment.
Instructions for connecting various external devices to the projector.
Instructions for securing cables and adapter covers for a clean setup.
Installing anti-theft devices like security bars and slots for projector protection.
Instructions for safely connecting the projector to a power source.
How to properly insert batteries into the remote control.
Managing multiple projectors with one remote using assigned ID numbers.
Adjusting the remote signal frequency for improved operational range.
Information on the remote sensor's operational range and limitations.
Using the remote as a computer mouse and keyboard via USB connection.
How to view the projector's current status on its built-in LCD monitor.
Accessing setup information and error history logs via the status monitor.
Step-by-step guide to power on the projector safely and correctly.
Step-by-step guide to power off the projector safely and correctly.
How to control the audio volume of the projector.
Temporarily muting the screen and audio output using the AV MUTE function.
Choosing the active input source for displaying video signals.
Adjusting the image's aspect ratio for optimal display on the screen.
Adjusting the projector's tilt angle using its feet for proper projection.
Adjusting zoom and focus for a clear and sharp image.
Fine-tuning the lens position and using the centering feature.
Saving and recalling custom lens adjustment settings.
Automatically adjusting image position and phase for optimal display.
Manually adjusting the image position on the screen using controls.
Fixing keystone and other screen distortions using various modes.
Zooming in on specific parts of the image for detailed viewing.
Freezing the current image on the screen to pause the display.
Closing the lens shutter to black out the screen.
Displays input information for PbyP mode, showing main and sub areas.
Toggling the main and sub picture areas within the PbyP display.
Selecting input signals for simultaneous display in PbyP mode.
Swapping the positions of the main and sub picture areas.
Accessing frequently used projector settings through a simplified menu.
Accessing all projector settings grouped by category.
Explains common on-screen display terms and their meanings.
Lists all available items within each main menu category.
Adjusts the aspect ratio of the displayed image.
Automatically corrects vertical keystone distortion.
Manually adjusts vertical keystone distortion.
Manually adjusts horizontal keystone distortion.
Fine-tunes screen corners and sides for distortion correction.
Selects preset image modes (e.g., Cinema, Dynamic).
Details picture modes and their GAMMA/COLOR TEMP settings.
Adjusts power saving settings to reduce brightness and noise.
Configures projector mounting orientation (front, ceiling, etc.).
Resets EASY MENU settings to their default values.
Displays air filter usage time and allows resetting.
Changes the OSD display language.
Navigates to the main menu categories for detailed settings.
Adjusts the overall brightness of the projected image.
Adjusts the difference between light and dark areas of the image.
Adjusts the tonal response curve of the image for better detail.
Adjusts the color temperature of the image for accurate color rendition.
Adjusts the intensity of colors in the image.
Adjusts the color balance (green to magenta).
Adjusts the clarity and definition of image edges.
Controls automatic iris for optimal brightness in different scenes.
Saves and loads custom picture settings for quick recall.
Adjusts the aspect ratio of the displayed image.
Adjusts the over-scan ratio to fit the image to the screen.
Adjusts the vertical position of the image on the screen.
Adjusts the horizontal position of the image on the screen.
Adjusts the horizontal phase to eliminate flicker.
Adjusts the horizontal size of the image.
Performs automatic image adjustment for position and phase.
Selects progressive scan mode for video signals.
Adjusts noise reduction for video signals.
Selects color space for computer and component video signals.
Configures settings for component video ports (Y,Cb/Pb, Cr/Pr).
Sets video format for S-VIDEO and VIDEO ports.
Sets video format for HDMI inputs.
Sets digital range for HDMI inputs (Normal, Enhanced).
Configures input signal type for computer ports.
Enables/disables frame lock for stable image display.
Sets the display resolution for computer input signals.
Automatically corrects vertical keystone distortion.
Manually adjusts vertical keystone distortion.
Manually adjusts horizontal keystone distortion.
Fine-tunes screen corners and sides for distortion correction.
Automatically enables Eco mode on startup.
Manually enables/disables Eco mode for power saving.
Configures projector mounting orientation (front, ceiling, etc.).
Sets power consumption mode during standby.
Configures the monitor output port settings.
Adjusts the audio volume of the projector.
Turns the built-in speaker on or off.
Selects audio input source for output to speakers.
Sets the audio mode for HDMI inputs.
Changes the OSD display language.
Adjusts the position of the on-screen menu.
Selects a blank screen mode (e.g., Black, White).
Configures the screen displayed on startup.
Captures and uses custom images for startup/blank screens.
Locks the MyScreen function to prevent changes.
Controls the display of system messages.
Assigns custom names to input ports for easier identification.
Selects and displays template images for specific uses.
Configures Closed Caption display settings for video content.
Ignores specified input ports during auto search.
Automatically searches for input signals.
Enables/disables automatic keystone correction.
Automatically turns on projector when power is supplied.
Sets automatic shutdown timer for the projector.
Sets timer for lens shutter to turn off projector.
Selects function for USB Type B port (Mouse or Display).
Displays and resets lamp usage time.
Displays and resets air filter usage time.
Assigns functions to remote control's My Button.
Accesses service menu items like Altitude and Auto Adjust.
Adjusts fan speed based on projector altitude.
Fine-tunes automatic image adjustment settings.
Adjusts settings to reduce ghosting artifacts.
Sets timer for air filter replacement notifications.
Detects or sets the projector lens type automatically.
Locks lens adjustment buttons to prevent accidental changes.
Locks control panel or remote control buttons.
Selects which remote sensor to use (Front or Rear).
Sets remote control signal frequency (Normal or High).
Assigns an ID for remote control operation for multiple projectors.
Configures serial communication settings via CONTROL port.
Sets Baud Rate and Parity for serial communication.
Selects communication method for Network Bridge.
Sets time for waiting network responses.
Displays STACK menu for more information.
Configures wireless LAN settings like mode and encryption.
Enables/disables DHCP for automatic IP addressing.
Sets the projector's IP address manually.
Sets the subnet mask manually.
Sets the default gateway address manually.
Sets the DNS server address manually.
Sets the time difference from the computer.
Sets the projector's date and time.
Selects the wireless LAN channel.
Selects the encryption method for wireless connection.
Selects or enters the network name (SSID).
Displays current wireless LAN connection status.
Configures wired LAN settings.
Enables/disables DHCP for automatic IP addressing.
Sets the projector's IP address manually.
Sets the subnet mask manually.
Sets the default gateway address manually.
Sets the DNS server address manually.
Sets the time difference from the computer.
Sets the projector's date and time.
Displays current wired LAN connection status.
Sets a custom name for the projector.
Manages custom images for display.
Enables AMX device detection for network control.
Accesses presentation tools like PC-LESS and Network Presentation.
Executes network restart and initialization.
Changes the password to access the security menu.
Sets password to protect MyScreen settings.
Enables PIN code entry to use the projector.
Detects changes in projector angle or installation settings.
Sets password to protect MY TEXT settings.
Controls display of custom text on startup/info screens.
Allows editing of custom text content.
Controls the security indicator light status.
Displays STACK LOCK dialog for more information.
Displays images/audio from USB storage without a PC.
Displays images from USB in a thumbnail grid.
Controls images using remote, panel, or web interface.
Manages files and slideshows via the thumbnail screen menu.
Creates and edits slideshow playlist files.
Displays selected image at full screen size.
Controls still images in Full Screen mode.
Controls movie playback in Full Screen mode.
Displays images sequentially at set intervals.
Configures slideshow settings like start, stop, interval, play mode.
Displays computer images via USB cable connection.
Initiates the USB display connection and software.
Options available via right-clicking the application icon.
Controls image capture, display, and options.
Adjusts performance, resolution, and sound for USB display.
Step-by-step guide for safely replacing the projector lamp.
Important safety warnings regarding the projector lamp.
Instructions for cleaning or replacing the air filter.
Proper cleaning procedures for the projector lens to maintain image quality.
How to clean the projector body and remote control.
Interpreting error messages shown on the projector's status monitor.
Explains common error messages and their solutions.
Explains the meaning of projector indicator lamp states.
Resets all projector settings to factory defaults.
Lists common issues that are not machine defects and provides solutions.
To Next Page
