Need help?Do you have a question about the Christie TruLife+ Griffyn 4K32-RGB and is the answer not in the manual?
General| Brightness | 32, 000 Lumens |
|---|---|
| Lamp Life | 20, 000 hours |
| Lens Options | Interchangeable lenses |
| 3D Capability | Yes |
| Resolution | 3840 x 2160 |
| Contrast Ratio | 2, 000:1 |
| Light Source | Laser |
| Color Gamut | DCI-P3 |
| Input | HDMI, DisplayPort, 3G-SDI |
| Special Features | Edge Blending, Color Matching, Geometric Correction |
| Warranty | 3 years |
| Weight | 88 kg (194 lbs) |
Details copyright information and acknowledges trademarks and registered trademarks.
Provides general information on product accuracy, specifications, and warranty disclaimers.
Outlines the terms and limitations of Christie's standard limited warranty for products.
Emphasizes the importance of preventative maintenance to avoid voiding the product warranty.
States compliance with FCC rules and other regulatory standards for digital devices.
Discusses product design for recyclability and proper end-of-life disposal according to regulations.
Lists the projector models to which this Christie TruLife+ User Guide applies.
Provides instructions on how to access product documentation from the Christie website.
Lists additional documents providing further information on the projector.
Details essential safety and warning guidelines for operating the projector.
Provides crucial safety precautions before connecting the projector to AC power.
Outlines critical safety measures related to the projector's laser system.
Explains hazard zones and distances related to the projector's light intensity.
Specifies conditions for laser-illuminated projector installations in the United States.
Explains the meaning of various labels that may be found on the product.
Details general fire, shock, and electrical hazards applicable to the product and accessories.
Highlights specific electrical and laser hazards requiring caution during operation.
Specifies mandatory actions, such as disconnecting power, before maintenance.
Indicates labels related to electrical safety, such as protective earth ground.
Explains labels related to laser safety and light hazard warnings.
Provides contact details for technical support for Christie products.
Guidance on contacting your dealer for projector servicing and problem resolution.
Identifies and describes the main physical components of the projector.
Identifies and describes the components of the projector's display panel (home page).
Details the functions of each button on the infrared remote control keypad.
Specifies the orientation for displaying the projector image on the screen.
Sets the image resize preset to determine how the image displays in its native resolution or resizes.
Adjusts the image offset to align it on the screen, typically before boresight adjustment.
Resets the lens offset back to its default home position.
Ensures the projected image is parallel and centered with the lens and screen.
Disables lens motors to prevent accidental changes to zoom, focus, and offset.
Calibrates the zoom motor to ensure all zoom controls for the lens are enabled.
Controls the level of lens warnings displayed on the projector.
Defines keep-out areas for lens position to prevent interference and damage.
Defines keep-out areas for ultra short throw lens position.
Enables reduced keep-out areas for UST lenses to prevent projector damage.
Calibrates primary colors for accuracy, adjusting for lighting and environmental factors.
Adjusts the DMD color values as required for accurate color reproduction.
Changes the values of primary color components for precise color adjustment.
Changes primary color strength relative to other primary colors.
Adjusts the video signal color as required for optimal display.
Determines how color components are decoded for accurate color display.
Adjusts the color temperature as expressed in degrees Kelvin.
Adjusts color values of the input signal for more detailed picture.
Selects the color correction mode best suited to the input signal.
Adjusts image display based on ambient light conditions.
Delays output signal timing relative to input signal timing by a fraction of a frame.
Enables or disables the detection of film motion for proper playback.
Adjusts the sharpness of the projected image.
Combines several projected images into one seamless image.
Uses Christie Twist or Mystique to create and upload edge blend files.
Creates basic edge blends directly on the projector.
Resets edge blending to revert any applied edge blends.
Modifies non-blended region brightness to match blended regions.
Eliminates differences in black levels when edge blending multiple projectors.
Controls overlap of adjacent image edges for seamless image creation.
Determines how black level blending is used when shuttering or switching video input.
Resets black level blending to revert any applied blends.
Modifies the geometry of the projected image for all sources.
Uses warping to project images onto any surface shape.
Corrects distorted image shapes caused by projector angle.
Enables keystone corrections to fix keystoned image shapes.
Corrects vertical and horizontal distortion simultaneously.
Corrects vertical image shape where top/bottom borders are unequal.
Corrects horizontal image shape where left/right borders are unequal.
Resets keystone distortion to default values.
Crops specified pixels from any edge of the display.
Configures the current date on the Christie TruLife+ projector.
Configures the current time on the Christie TruLife+ projector.
Synchronizes the projector's date and time with the connected computer.
Allows selection of the background color for the projector's splash screen.
Chooses pre-defined locations for the on-screen display menus.
Selects the display language for the projector panel and on-screen menus.
Sets the temperature measurement unit to Celsius or Fahrenheit.
Limits web interface access by changing the default user account password.
Provides access to the generated password for web interface functionality.
Restores projector operation to its previous state after an AC power loss.
Enables electronics to remain on while the projector is in standby mode.
Balances fan noise and brightness performance based on projection needs.
Defines available video inputs and their configuration for persistent loading.
Automatically informs the video source of preferred signal formats via EDID.
Manages the High Frame Rate mode, affecting output resolution (2K/4K).
Controls projector brightness and color using the LiteLOC feature.
Performs sensor-to-screen calibration for accurate color and brightness over time.
Enables LiteLOC with specific settings to maintain required color and brightness levels.
Disables LiteLOC to manually control lasers, allowing color/brightness drift.
Sets up 1D color uniformity by measuring and adjusting primary colors.
Disables status LEDs and display panel heartbeat feature for stealth operation.
Enables communication between receivers, wired keypad, and the projector.
Determines remote access level for RS232 port or Ethernet.
Configures Christie TruLife+ to communicate through Art-Net using the Ethernet connector.
Details the available channels per universe for Art-Net communication.
Provides an index of input channels available based on video input configuration.
Automates repetitive tasks using macros for regular operations.
Creates a macro to automate a repetitive task on a scheduled basis.
Creates a macro triggered by a GPIO input pin for external signal automation.
Duplicates a macro to create another with similar functionality.
Edits existing macros to modify their functionality.
Removes macros that are no longer relevant.
Configures Generic Purpose Input Output (GPIO) pins for interfacing with external devices.
Provides pinout information for the GPIO connector on the input panel.
Saves current projector configuration settings into a new profile.
Imports projector profiles from USB drives or files to transfer settings.
Returns the projector to configuration settings specified in a particular profile.
Changes the name of a saved projector profile to a more meaningful identifier.
Saves projector settings to a USB flash drive or file.
Removes projector profiles that are no longer needed.
Provides instructions for upgrading the projector's software version.
Explains how to add a software license to enable projector features.
Saves current projector settings to an external device for backup.
Restores backed-up settings onto the projector from an external source.
Resets all customized settings back to the projector's factory default values.
Displays read-only information about software licenses and features.
Uses a diagnostic tool to examine a still version of an incoming image.
Introduces test patterns used for configuration and diagnosing issues.
Guides users on selecting specific test patterns for diagnostics and setup.
Adjusts grey scale levels in grey test patterns for analysis.
Modifies characteristics for ramp video signal test patterns.
Modifies characteristics for square or diagonal grid test patterns.
Enables specific colors in test patterns for diagnostics or overlay setups.
Selects engine test patterns for calibration and internal optical alignment.
Displays alarms, warnings, and errors reported by the projector's status system.
Captures diagnostic information for troubleshooting by Christie personnel.
Configures email addresses and SNMP trap destinations for recorded alarms.
Configures the SNMP read community string for device access.
Enables specific traps for SNMP monitoring of projector conditions.
Specifies IP addresses for receiving SNMP notifications when a trap condition is met.
Downloads SNMP management information base (MIB) files for data format description.
Resets all custom device settings to the projector's factory defaults.
Lists safety standards and requirements the product conforms to.
Details EMC standards for emissions and compatibility of multimedia equipment.
Specifies immunity requirements for electromagnetic compatibility.
Addresses California law requiring reasonable security features for internet-connected devices.
Lists EU and China directives and regulations concerning hazardous substances and waste.
Provides contact details for Christie's worldwide office locations.
Lists contact information for independent sales consultant offices.
To Next Page
