Chroma 66202 - Page 66

Digital Power Meter 66200 Series User’s Manual
Header on: :THD:MODE<space><CRD><RMT>
Header off: <CRD><RMT>
Example: none
[ SOURce : ] THD : ORDer 66202
Description: This command sets the order of THD measure.
Setting Syntax:
THD:ORDer<space><NR1><PMT>
Setting Parameters: <NR1>, 2 ~ 100
Query Syntax: THD:ORDer?<PMT>
Response Parameters: <NR1>, 2 ~ 100
Header on: :THD:ORDER<space><NR1><RMT>
Header off: <NR1><RMT>
Example: none
[ SOURce : ] TRIGger 66201 | 66202
Description:
Three different modes, GONG, INRUSH and ENERGY, are triggered by this
command.
Setting Syntax:
TRIGger<space><CRD><PMT>
Setting Parameters: <CRD>, OFF∣ON
Query Syntax: TRIGger:STATe?<RMT>
Response Parameters: <CRD>, STOP∣FINISH∣RUNNING
Header on: :TRIGGER:STATE<space><CRD><RMT>
Header off: <CRD><RMT>
Example: none
[ SOURce : ] TRIGger : MODE 66201 | 66202
Description:
This command is used to select which mode will be triggered.
Setting Syntax:
TRIGger:MODE<space><CRD><PMT>
Setting Parameters: <CRD>,
66201: NONE
∣GONG
66202: NONE
∣GONG∣INRUSH∣ENERGY
Query Syntax: TRIGger:MODE?<PMT>
Response Parameters: <CRD>, NONE∣GONG∣INRUSH∣ENERGY
Header on: :TRIGGER:MODE<space><CRD><RMT>
Header off: <CRD><RMT>
Example: none
[ SOURce : ] PROTection : CLEar 66201 | 66202
Description: This command clears the protection message.
Setting Syntax:
PROTection:CLEar<PMT>
Setting Parameters: none
Query Syntax: none
Response Parameters: none
Example: none
5-24