This document describes the CQSA-E 1024, a versatile DMX lighting control interface designed for both USB and Ethernet Stand Alone operation. It offers comprehensive control over DMX fixtures, supporting various modes and configurations for professional lighting applications.
Function Description
The CQSA-E 1024 functions as a DMX controller, capable of managing up to 1024 DMX channels. It supports both live control via USB connection to a computer and standalone operation, where pre-programmed scenes are played back without a computer. The device is compatible with Player, Pro, and Studio DMX software, and can be connected to an access point or Wi-Fi router for remote device configuration and lighting control. It features an onboard memory for storing up to 20,000 scenes, providing extensive storage for complex lighting shows. The device also includes a DMX Splitter mode, enhancing the reliability of DMX networks.
Key functionalities include:
- Live Control: Connects via USB to a computer running DMX software for real-time control.
- Stand Alone Operation: Plays back pre-recorded scenes without a computer, ideal for permanent installations or events where a computer is not required.
- Multiple Zone Management: Supports up to 5 zones concurrently, allowing for different scenes or effects in various areas.
- Real-Time Clock (RTC): Enables precise scheduling of scenes based on time and date.
- Triggering Options: Supports various triggers including dry contact, infrared, light sensor, and DMX IN for interactive and automated shows.
- Master/Slave Configuration: Allows multiple CQSA-E 1024 devices to work together, expanding DMX channel capabilities and synchronizing shows.
- Art-Net and sACN Support: Integrates into existing Art-Net or sACN networks for advanced DMX distribution and control.
- Scene Recovery: Automatically restores the last played scene after a power off, ensuring continuity.
Important Technical Specifications
- Number of DMX Outputs: 2 (XLR5 optional), configurable as 512 or 1024 DMX channels (512 in Stand Alone mode, 1024 with PC).
- DMX Modes: 2x512 (splitter), 1024, 512 in/out, fine DMX channels (16 bits).
- External Memory: SD card slot (accepts FAT format, Class 6, 8 and 10, up to 256 GB).
- Memory Capacity: 20,000 scenes with 16 Ch., 6000 steps with 512 Ch., 3000 steps with 1024 Ch.
- CPU: 32-bit processor.
- Dimensions: H: 38mm (1.49in) / W: 166mm (6.54in) / D: 97mm (3.82in).
- Net Weight (interface): 0.2 Kgs (0.44 lbs.).
- Gross Weight (package): 0.4 Kgs (0.9 lbs.).
- Power Input: 9V to 24V DC, 0.5A max on DC connectors, 5V, 0.5A via USB.
- High Voltage Protection: Yes.
- Housing: Black with 4 mounting slots, ABS Plastic.
- IP Rating: IP40.
- Power Consumption: 0.2 – 0.5 W.
- Operating environment: Indoor.
- Storage: Keep dry.
- Operating Temperature: -25 to +70 C°.
- Certifications: CE, RoHS.
- International Warranty: Yes, 5 years.
- System Compatibility: Windows (7 and +), MAC OS X (10.6 and higher) and Linux (64 Bits, Debian, Redhat, Archlinux, Raspberry Pi).
- DM X Input: PC and Stand-Alone mode, DMX record, DMX trigger.
- Multiple Zone: 5 Zones, play up to 5 scenes concurrently.
- Stand Alone DMX Merging: Yes, merge DMX lines and interfaces to play different Zones together.
- Real-Time Clock - RTC: Time and calendar triggers (minutes, hours, week, days, month).
- Trigger Buttons: 8 buttons with blue LED status display.
- Menu Buttons: 4 buttons (Mode, Confirm, plus, less).
- Mode Menu: Scene and Page selection, Speed, Master Dimmer, Custom colours.
- RJ45 I/O: 3x RJ45 connectors for all In/Out pins and connections.
- Dry Contact Triggers: 7 contacts port on 3.3V or 5V.
- Infra-red Receiver: External IR PCB and IR remote control available (optional).
- Infra-red Options: 10 scene selection, scene speed, master dimmer and next scene.
- Light Intensity Triggers: External PCB with light sensor available (optional).
- Master/Slave: Link up to 32 units by wired RJ45 connection or up to 128 units by Ethernet.
- Compatibility: 8- and 16-bit DMX fixtures.
Usage Features
The CQSA-E 1024 is designed for intuitive operation, featuring a 7-segment LED display and tactile buttons for mode selection, value adjustment, and scene triggering.
Front and Side Panels:
- Mode Selection: Buttons for selecting Trigger, Page, Colour, Speed, Dimmer, Zone, and Function modes.
- Value Adjustment: Plus and Minus buttons to increase or decrease values.
- Mini USB Connector: For power and data connection.
- 8 Trigger Buttons: Dedicated buttons for triggering scenes (Scene 1 On/Off to Scene 8 On/Off).
- Micro SD Port: For storing Stand Alone shows and configurations.
Rear Panel:
- RJ45 Connector TRIG: Provides 5V output for external triggers.
- Power Supply 9V-24V DC Input Jack: For main power.
- RJ45 Ethernet Port: For network (LAN) connection.
- RJ45 Input/Output: Configurable for Master/Slave, Clock, Master/Slave - Data, Lighting Fixture - Data, IR Signal via external IR receiver, Not use, Data out, and Ground.
- XLR DMX Signal Connector A and B: For DMX output.
Operating Modes:
- Scene Mode (SA): Selects a desired scene using the +/- buttons.
- Page Mode (PA): Selects the desired page using the +/- buttons.
- Colour Mode (Co): Selects a colour from the colour wheel.
- Speed Mode (SP): Increases or decreases the speed of the current scene.
- Dimmer Mode (DI): Increases or decreases the general intensity (dimmer and/or RGB channels).
- Zone Mode (Zo): Selects the zone using the +/- buttons.
Advanced Device Configuration:
- IP Interface: Configures the static IP or DHCP IP mode.
- Firmware Update: Allows updating the device firmware via the SD card.
USB Connection (Drivers + Connection):
- Windows Drivers: Automatically installed upon connection.
- Mac and Linux Drivers: Automatically installed.
- Multiple USB Connections: Supports connecting multiple CQSA-E 1024 devices via a USB hub for expanded control.
Ethernet Connection and IP Settings:
- DHCP or Static IP: Configurable IP address settings.
- Network Configuration: Allows setting the device name, subnet, gateway, and DNS.
Stand Alone Configuration and Settings:
- Save Scene in Memory: Saves the current scene to the device's internal memory or SD card.
- Configuration Options: Adjusts DMX I/O, trigger scenes, clock, options (LED display, power off priority), Master/Slave, and Zone settings.
- Reverting to Stand Alone Mode: The device automatically enters Stand Alone mode when powered on without a control software connection.
- External Power Supply and USB: The device can be powered via an external power supply or USB.
- Micro SD Card: Stores Stand Alone shows and configurations, with support for FAT or FAT32 format and up to 256 GB capacity.
- Choosing Stand Alone Modes: Allows customizing the interface according to the modes used in Stand Alone.
- Trigger Configuration: Assigns scenes to buttons, sets colors, and configures external triggers.
- Clock and Calendar: Programs scenes based on specific dates and times, with options for daily, weekly, and monthly repetitions.
- Dry Contact: Connects external contacts to trigger scenes.
- Infrared: Uses an IR remote control for scene selection, speed, master dimmer, and next scene.
- Light Sensor: Triggers scenes based on ambient light levels.
- DMX IN: Triggers scenes based on DMX channel values.
Master/Slave Settings and Configuration:
- Cable Master/Slave: Connects multiple devices via RJ45 cable for synchronized control.
- Ethernet Master/Slave: Connects multiple devices via Ethernet for synchronized control.
- Art-Net and sACN Settings and Configuration: Enables Art-Net or sACN show mode, allowing the device to broadcast or receive DMX data over a network.
Maintenance Features
- Firmware Updates: The device supports firmware updates via the SD card, ensuring access to the latest features and bug fixes.
- SD Card Management: The SD card is crucial for storing Stand Alone shows and configurations. Regular backups and proper formatting (FAT or FAT32) are recommended.
- Troubleshooting: The manual provides guidance on common issues, such as checking network connections, verifying IP settings, and ensuring proper driver installation.
- Physical Dimensions: The compact design (166mm x 97mm x 38mm) allows for easy integration into various setups.
- Robust Housing: Made of ABS Plastic with 4 mounting slots, providing durability and protection.
- High Voltage Protection: Ensures the device's longevity by protecting against electrical surges.
- International Warranty: Comes with a 5-year international warranty, providing peace of mind.
Need help?
General
To Next Page