and move the lever rearward or forward. You must also
press the brake pedal to shift the transmission out of the
PARK position (refer to “Brake/Transmission Shift Inter-
lock System” in this section). To shift past multiple gear
ranges at once (such as PARK to DRIVE), move the lever
past the first (or second) detent. Select the DRIVE range
for normal driving.
The electronically-controlled transmission provides a
precise shift schedule. The transmission electronics are
self-calibrating; therefore, the first few shifts on a new
vehicle may be somewhat abrupt. This is a normal
condition, and precision shifts will develop within a few
hundred miles (kilometers).
Shifting from DRIVE to PARK or REVERSE should be
done only after the accelerator pedal is released and the
vehicle is stopped. Be sure to keep your foot on the brake
pedal when moving the shift lever between these gears.
Standard Shifter
The standard shift lever has PARK, REVERSE, NEU-
TRAL, DRIVE, and LOW shift positions. Using the LOW
position manually downshifts the transmission to a
lower gear based on vehicle speed.
Shift Lever
5
STARTING AND OPERATING 345
To Next Page
Loading...
