EasyManuals Logo

Chrysler ASPEN User Manual

Chrysler ASPEN
479 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #274 background imageLoading...
Page #274 background image
WARNING!
Do not attempt to push or tow your vehicle to get it
started. Vehicles equipped with an automatic trans-
mission cannot be started this way. Unburned fuel
could enter the catalytic converter and once the
engine has started, ignite and damage the converter
and vehicle. If the vehicle has a discharged battery,
booster cables may be used to obtain a start from a
booster battery or the battery in another vehicle. This
type of start can be dangerous if done improperly.
Refer to “Jump Starting” in Section 6 for the proper
jump-starting procedures and follow them carefully.
If the engine has been flooded it may start to run, but not
have enough power to continue running when the key is
released. If this occurs, continue cranking with the accel-
erator pedal pushed all the way to the floor. Release the
accelerator pedal and the key once the engine is running
smoothly.
If the engine shows no sign of starting after two 15
second periods of cranking with the accelerator pedal
held to the floor, the normal starting procedure should be
repeated.
After Starting
The idle speed is automatically controlled on fuel injected
engines and will decrease as the engine warms up.
STARTING AND OPERATING 273
5

Table of Contents

Other manuals for Chrysler ASPEN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chrysler ASPEN and is the answer not in the manual?

Chrysler ASPEN Specifications

General IconGeneral
BrandChrysler
ModelASPEN
CategoryAutomobile
LanguageEnglish

Related product manuals