66 SAFETY
Car Seat With Head Restraint Folded
Installing Child Restraints Using the Top
Tether Anchorage
1. Look behind the seating position where
you plan to install the child restraint to find
the tether anchorage. You may need to
move the seat forward to provide better
access to the tether anchorage. If there is
no top tether anchorage for that seating
position, move the child restraint to
another position in the vehicle if one is
available.
Rear Seat Tether Strap Attachment (Second Row
7 Passenger Quad Anchorage Shown)
WARNING!
Always make sure the head restraint is in its
upright position when the seat is to be used
by an occupant who is not in a child restraint.
Sitting in a seat with the head restraint in its
lowered position could result in serious injury
or death in a collision.
1 – Folded Headrest
2 – Child Restraint
WARNING!
Do not attach a tether strap for a rear-facing
car seat to any location in front of the car
seat, including the seat frame or a tether
anchorage. Only attach the tether strap of a
rear-facing car seat to the tether anchorage
that is approved for that seating position,
located behind the top of the vehicle seat.
See the section “Lower Anchors and Tethers
for CHildren (LATCH) Restraint System” in
“Occupant Restraint Systems” in the Owner’s
Manual for the location of approved tether
anchorages in your vehicle.
21_RU2_H_SU_EN_USC_t.book Page 66
To Next Page
Loading...
