TECHNICAL SPECIFICATIONS 91
ENGINE FLUIDS AND LUBRICANTS
Component Fluid, Lubricant, or Genuine Part
Engine Coolant, Battery Coolant, Power Electric Coolant
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile
(240,000 km) Formula OAT (Organic Additive Technology) with deionized, or
distilled water for proper corrosion protection or equivalent meeting the
requirements of FCA Material Standard MS.90032.
Engine Oil – 3.6L Engine
We recommend you use API Certified SAE 0W-20 Engine Oil, meeting the
requirements of FCA Material Standard MS-6395 such as Mopar,
Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE
grade.
Engine Oil Filter
We recommend you use a Mopar Engine Oil Filter. If a Mopar Engine Oil
Filter is unavailable only use filters that meet or exceed SAE/USCAR-36
Filter Performance Requirements.
Fuel Selection 87 Octane (R+M)/2 Method, 0-15% Ethanol (Do not use E-85).
8
21_RU2_H_SU_EN_USC_t.book Page 91
To Next Page
Loading...
