EasyManua.ls Logo

Chrysler Uconnect Touch - Audio

Chrysler Uconnect Touch
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Audio
1. Press the SETTINGS hard-key on the right side of the
unit.
2. Then scroll down and press the Audio soft-key to get
to the Audio menu.
3. The Audio Menu shows the following options for you
to customize your audio settings.
Equalizer
Touch the Equalizer soft-key to adjust the Bass, Mid
and Treble. Use the + or - soft-key to adjust the
equalizer to your desired settings. Press the back
arrow soft-key when done.
Balance/Fade
Touch the Balance/Fade soft-key to adjust the
sound from the speakers. Use the arrow soft-key to
adjust the sound level from the front and rear or
right and left side speakers. Touch the Center C
soft-key to reset the balance and fade to the factory
setting. Press the back arrow soft-key when done.
Speed Adjusted Volume
Touch the Speed Adjusted Volume soft-key to select
between OFF, 1, 2 or 3. This will decrease the radio
volume relative to a decrease in vehicle speed. Press
the back arrow soft-key when done.
4. Touch the Exit soft-key to exit from the Audio Menu.
18 Uconnect Touch™ 4.3 SYSTEM