Exploded view & dismantling sequence of parts
- 6 -
3. Dismantling sequence of indoor unit of FRD23-B, FRD35-B and FRD50-B
(1) Remove 18
(2) Remove 17, 19
(3) Remove 12
(4) Remove 11
(5) Remove 16
(6) Remove 14, 8
(7) Remove 9, 13
(8) Remove 10
(9) Remove 15
(10) Remove 7, 6
(11) Remove 20
(12) Remove 21, 4
(13) Remove 5
(14) Remove 3, 1
(15) Remove 2.
Annex: Dismantling sequence of typical parts
Indoor capacitor
(1) Remove 12
(2) Remove capacitor.
Indoors motor:
(1) Remove fan section rear plate 12
(2) Remove fan section top plate 11
(3) Remove spiral casing 13 and impeller 9
(4) Remove connecting plug from control board in electric box
(5) Remove motor 10 and capacitor.
Note: Return air box of FRD23-B, FRD35-B or FRD50-B indoor unit is optional. There are
two modes of air return (lower air return and rear air return) and two modes of water
discharge (left and right). This exploded view and dismantling sequence is based on lower air
return and left water discharge.
To Next Page
Loading...