3
1. GENERAL INFORMATION
This documentation is edited in compliance with that de ned in point 1.7.2 of Directive EC 37/98 concerning the
approximation of laws of the Member States relating to machinery.
The content of this manual is of a strictly technical nature and is the property of CIAM Spa, it is therefore forbidden
to reproduce, reveal or modify, partially or completely, its content without written authorisation.
Any infringement will be legally pursued.
1.1 Warnings for the purchaser
The manual, as well as the EC certi cate of conformity, is an integrating part of the machine and must accompany it
always, whether it is transferred or resold. It is up to the user to keep all the documentation intact for consultation,
during the machine entire life-span.
In case of loss or destruction, it is possible to request a copy from CIAM Spa specifying the exact model, serial
number and year of manufacture.
The manual re ects the technical state at the time of supply. The writing company reserves the right to make any
amendments to its products it sees t, without having to update manuals and plants relating to previous production
batches.
The manufacturing company declines any responsibility for production anomalies and damages caused by the
machine to things, persons and animals occurred in the following cases:
• Improper use of the plant or use on behalf of unsuitable or unauthorised personnel
• Power supply defects
• Insuf cient or lack of periodic maintenance
• Amendments or interventions not agreed and authorised by the manufacturer
• Use of unoriginal spare parts or not speci c for the model
• The total or partial non compliance with these instructions
The responsibility for applying the safety prescriptions reported below is of the technical personnel responsible for
the activities on the machine, who must ascertain that the authorised personnel:
• is trained to carry out the requested activity
• is aware of and scrupulously observes the prescriptions contained in this document
• is aware of and applies the general safety regulations to the machine.
The non compliance with the safety regulations can cause injuries to personnel and damage the components and
control unit of the machine.
The comprehensive reading of this manual cannot, in any case, replace an adequate experience of the operators.
The user can, at any time, contact the dealer to request information additional to that contained herewith, as well
as signal any improvement proposals.
To Next Page
Loading...