CIAM 900 Series - Load Limits

8
MODEL
LINEAR SHAPED ANGLE ROUND ANGLE
P
(mm)
L
(mm)
Hp
(mm)
Hs
(mm)
Ht
(mm)
P
(mm)
P1
(mm)
L1
(mm)
L2
(mm)
L3
(mm)
L4
(mm)
P
(mm)
P2
(mm)
L4
(mm)
R
(mm)
A1
V7A1....100 816 1000 789 931 1330 – – – – – – – – – –
V7A1....150 816 1500 789 931 1330 – – – – – – – – – –
V7A1....200 816 2000 789 931 1330 – – – – – – – – – –
V7A1....250 816 2500 789 931 1330 – – – – – – – – – –
V7A1....300 816 3000 789 931 1330 – – – – – – – – – –
V7A1....AP90 – – 789 931 1330 – – – – – – 816 957 682 1299
A2
V7A2....100 816 1000 609 931 1150 – – – – – – – – – –
V7A2....150 816 1500 609 931 1150 – – – – – – – – – –
V7A2....200 816 2000 609 931 1150 – – – – – – – – – –
V7A2....250 816 2500 609 931 1150 – – – – – – – – – –
V7A2....300 816 3000 609 931 1150 – – – – – – – – – –
V7A2....AP90 – – 609 931 1150 – – – – – – 816 957 682 1299
2.3 LOAD LIMITS
It is necessary to observe the following rules when stocking the display cabinet:
- arrange the product evenly, avoiding empty areas
- arrange the product so as not to exceed the load limit provided (see drawings following page).
!
WARNING
IT IS FUNDAMENTAL NOT TO EXCEED THE LIMIT PROVIDED IN ORDER NOT TO ALTER THE CORRECT
AIR CIRCULATION AND THEREFORE AVOID A HIGHER PRODUCT TEMPERATURE AND A POSSIBLE
RISK OF ICE BLOCKS FORMING ON THE EVAPORATOR
- It is recommended to rotate the products, using those which have been in the display cabinet longer.
!
WARNING
CERTAIN CONFECTIONERY PRODUCTS, ESPECIALLY THOSE GARNISHED WITH CREAM OR CUSTARD,
WITH THE PASSING OF TIME, ARE SUBJECT TO DETERIORATION. REMEMBER THAT THE DISPLAY
CABINET IS A SELLING DISPLAY AND NOT FOR PRESERVATION!
2.2.2 Series 750