5
1.4 Safety regulations in the manual
The purpose of the prescriptions, indications, regulations and respective safety notes described in the various
chapters of the manual, is that to dene a series of behaviours and obligations to be complied with when carrying out
the various activities, in order to operate in safe conditions for personnel, appliance and surrounding environment.
The reported safety regulations are aimed at the authorised and trained personnel commissioned to carry out the
various activities and operations of:
• transport
• installation
• functioning
• handling use
• maintenance
• cleaning
• decommissioning and dismantling which constitute the only use modalities provided for the machine in
question.
!
ATTENTION
THE COMPREHENSIVE READING OF THIS MANUAL CANNOT, IN ANY CASE, REPLACE AN ADEQUATE
EXPERIENCE OF THE USER, THEREFORE CONSTITUTING ONLY A USEFUL REMINDER OF THE TECH-
NICAL FEATURES AND THE MAIN OPERATIONS TO BE FULFILLED.
1.5 Symbols used
Certain symbols are used in the manual to recall the readers’ attention and highlight certain particularly important
aspects of the treatment.
The following table describes the meaning of the different symbols used.
SYMBOL MEANING NOTES
Danger
Indicates a danger with risk of injury, even death, for the user.
Pay maximum attention to the blocks of text indicated by this symbol.
!
Attention
Represents a warning of possible deterioration or damage to the machine, appliance or
another personal object of the user.
Pay maximum attention to the blocks of text indicated by this symbol.
Warning
Note
Indicates a warning or a note on the key functions or useful information.
Pay maximum attention to the blocks of text indicated by this symbol.
Supplementary
information
The blocks of text which contain complementary information are introduced by this
symbol.
This information has no direct relation with the description of a function or the development
of a procedure.
They can be cross-referenced to other complementary documentation, such as attached
use instructions manuals, technical documents or to other sections of this manual.
Avoid damaging
the material
Indication relating to a strong risk of damaging a piece, for example by using a wrong tool
or mounting following an incorrect procedure.
Special tool
Indicates that the use of a tool or special appliance is effectively necessary.
Visual observation
Indicates to the reader that he must proceed to a visual observation. This symbol is also
found in the use instructions. It is requested that the user reads a measuring value, checks
a signal, etc.
Auditory
observation
Indicates to the reader that he must proceed to an auditory observation. This symbol is also
found in the use instructions. It is requested that the user listens to a functioning noise.
To Next Page
Loading...