CIAM 900 Series - Manufacturers Address

To Next Page

To Previous Page

1.2 Introduction

The CIAM group has always used top quality materials and their introduction in the company, their storage and

their production use is constantly controlled in order to guarantee there are no damages, deteriorations and

malfunctionings.

All the constructive elements have been designed and built to guarantee a high safety and reliability standard.

All the display cabinets are submitted to rigid tests before being delivered. However, a good performance in time of

the purchased product, depends on the correct use and an adequate maintenance.

We therefore invite you to scrupulously read this manual containing the necessary indications to maintain the

aesthetic and functioning features of your display cabinet unaltered.



NOTE

IN ORDER NOT TO COMPROMISE THE FUNCTIONING AND SAFETY OF THE MACHINE, INSTALLATION

AND PARTICULARLY COMPLEX MAINTENANCE ARE NOT DOCUMENTED IN THIS MANUAL AND ARE

CARRIED OUT BY THE WRITING COMPANY SPECIALISED TECHNICIANS

The use and maintenance manual contains the necessary information to comprehend the functioning modalities

of the machine and the correct use of the same, in particular: the technical description of the various functioning

groups, appliances and safety systems, functioning, use of instruments and interpretation of any diagnostic signals,

main procedures and information relating to routine maintenance interventions.

For the correct use of the machine it is necessary that the work environment is in compliance with the safety and

hygiene regulations in force.

WARNING

BEFORE USING THE MACHINE, THE INSTALLERS AND USERS MUST READ AND COMPREHEND ALL

THE INSTRUCTIONS CONTAINED HEREWITH.

1.3 Manufacturer’s address

INSTRUCTIONS FOR REQUESTING INTERVENTIONS

For assistance, the user must contact the dealer from whom he has purchased the appliance. The writing company is

always at the disposal of the Client for any requests of information or clarication relating to the use, maintenance,

installation, etc., via e-mail address: service@ciamgroup.it.

CIAM spa

Head ofce and establishment:

06083 Bastia Umbra (PG) Italy

Viale Europa, 120

Tel. (+39) 075 80161 Fax. (+39) 075 8016215

http://www.ciamgroup.it e-mail: info@ciamgroup.it