EasyManua.ls Logo

Ciar PS10BSA - User Manual

Ciar PS10BSA
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ENG
ITA
DESCRIPTION: -
PREPARED BY: M.CHIARAVALLOTTI
DOC.COD.: N470010186
CHECKED BY: C.UGUCCIONI
APPROVED BY: A.ROSATI
REV.Nr.: 1.0
DATE: 09/01/2015
Kit PS10BSA 2,2Ah - Li-Ion
Instruction Manual / Manuale d’istruzione
PS10BSA
Power supply unit
PS05
for PS10BSA
Power supply unit
PS10 for PS10BSA
Question and Answer IconNeed help?

Do you have a question about the Ciar PS10BSA and is the answer not in the manual?

Summary

Precautions for Use

General

General safety guidelines for product usage and manual content.

Disclaimer

Liability limitations for product misuse or non-compliance with manual.

Storage and Usage Conditions

Specifies optimal temperature and humidity for device operation and storage.

Recommendations for the Final User

Guarantee

PS05 Power Supply for Charging

Fitting the Plug

Step-by-step guide on how to attach the correct mains plug to the PS05 unit.

Removing the Plug

Instructions for safely detaching the mains plug from the PS05 power supply unit.

Characteristics of PS05 Power Supply Unit

Precautions for Use of PS10 BSA Supply Unit

Precautions for Use

Safety guidelines for using the PS10BSA power supply unit, including handling and connection.

Characteristics of PS10 Transformer Type

Instruction for PS10 BSA Recharging

Preamble

Explains battery care to maximize life and avoid deep discharge conditions.

Standard Charging Procedure

Step-by-step guide on connecting and charging the PS10BSA battery using PS05 or PS10.

Under Discharge

Procedures to attempt battery recovery if it reaches an 'under discharge' state.

Auxiliary Accessories for Battery Kit

Kit Power On;Off

Describes a button to completely switch off the battery, maximizing autonomy.

Kit Power Selector

Explains how this device allows use of motors during charging with PS10, or during charge with PS05.

Assembly of Kit PS10 BSA

PS10 BSA Floor Version

Describes using the PS10BSA as an ancillary device on the floor without installation.

PS10 BSA Surface-mounted Version

Instructions for mounting the PS10BSA unit to a surface using brackets.

Surface-mounted Assembly Steps

Detailed steps for attaching mounting brackets to the PS10BSA casing.

Characteristics of PS10 BSA 2.2 Ah Li-Ion Battery

Ciar PS10BSA Specifications

General IconGeneral
BrandCiar
ModelPS10BSA
CategoryBattery Charger
LanguageEnglish