4.9.26 - HOLIDY0XS menu
This function is used to dene 16 public holiday periods. Each
period is dened with the aid of three parameters: the month,
starting day and duration of the public holiday period. During
these public holidays the controller will be in occupied or unoc
-
cupied mode, depending on the programmed periods validated
for public holidays.
Each of these public holiday periods can be displayed and
changed with the aid of a sub-menu.
ATTENTION: The broadcast function must be activated to
utilise the holiday schedule, even if the unit is running in
stand-alone mode (not connected to Network).
NAME FORMAT DEFAULT UNIT DESCRIPTION
HOL_MON 0-12 0 - Holiday month
HOL_DAY 0-31 0 - Holiday day
HOL_LEN 0-99 0 - Holiday duration
4 - SETTING UP PRO-DIALOG+ CONTROL
EREBA ACCESS EN - 16
To Next Page
Loading...