Getting Started
For best results, connect Cielo Breez Lite smart Wi-Fi controller
with the provided USB cable and adapter. Mount your Breez Lite
on a wall in your AC's line of sight and plug it into a power source.
Special Note: It is strongly advised that whenever there
is a need to use the remote control for AC/heat pump,
point it towards Breez Lite while performing any action.
This way, your AC/heat pump and Cielo Home app will
always be in sync.
For optimal placement and control:
Make sure Breez Lite is in the line of sight of your air
conditioner or heat pump.
To avoid deviated sensor readings, do not place
Breez Lite where it may be exposed to excessive
sunlight or other heat sources.
○
○
1
To Next Page
Loading...
