32
8000 Series Mobile Computer Reference Manual
3.2.5 POWER ON MODE
Set the startup screen once the mobile computer is turned on. Press the arrow keys [Up]
and [Down] to select “Program Resume” or “Program Restart”, and then press [ENTER].
Program Resume: When selected, the mobile computer will start from the last session
of program before it is turned off.
Program Restart: When selected, the mobile computer will start from the first session
of the program.
3.2.6 KEY CLICK
The system will produce an audible signal when any key on the keypad is pressed. The
current value is highlighted. Select a desired tone for the buzzer or mute it.
3.2.7 SYSTEM PASSWORD
Set a password to control user access to System Menu, Program Manager and Kernel
Menu. The password can be up to eight alphanumeric characters.
Note: The password is case-sensitive. To disable a previous password, enter blank on
the "Input new password" and "Verify password" screens.
3.2.8 FONT
Font version information can be viewed here. It displays System Font if there is no
custom font file. If a multi-language font file is downloaded, you will be able to select a
font from the list.
3.2.9 DEFAULT SET
Reset system settings to the default values, except for the reader settings.
To Next Page
Loading...
Need help?
General
