EasyManua.ls Logo

CIPU CSPPS702 - Technical Data

CIPU CSPPS702
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Step 2.
The water level of the inground
swimming
In order to prevent water from
flowing
First screw the adapter into the
water
assembly.
Step 1
REGULARLY VERIFY
1. The correct attachments of the mechanical parts and of the
2. The correct position, attachment and condition of the supply cables and of the insulating
parts.
3. The temperature of the motor. In the event of any excessive high, stop immediately and
have it repaired.
4. The vibration of
the pump. In the case of any excessive high, stop immediately and have it
repaired.
CAUTION
Owing to the complexity of the cases covered, the instructions for installation, use and
maintenance
contained in this manual do not attempt to examine all possible
cases of service and
maintenance. If supplementary instructions are required or special
problems arise, do not hesitate to
contact the distributor
TECHNICAL DATA
Item CSPPS702
Input Power 685w
H. Max 32ft
Q. Max/min 273L
V 115
HZ 60
IP IPX5
swimming
pool is lower than the water inlet of the
pump
flowing
backward, this pump equipped a check
valve.
water
inlet of the pump, and then install the
connector
Step 1
Step 2
1. The correct attachments of the mechanical parts and of the
support screws of the pump.
2. The correct position, attachment and condition of the supply cables and of the insulating
3. The temperature of the motor. In the event of any excessive high, stop immediately and
the pump. In the case of any excessive high, stop immediately and have it
Owing to the complexity of the cases covered, the instructions for installation, use and
contained in this manual do not attempt to examine all possible
and imaginable
maintenance. If supplementary instructions are required or special
contact the distributor
/agent.
CSPPS703
878w
36ft
308L
115
60
IPX5
pump
.
valve.
connector
support screws of the pump.
2. The correct position, attachment and condition of the supply cables and of the insulating
3. The temperature of the motor. In the event of any excessive high, stop immediately and
the pump. In the case of any excessive high, stop immediately and have it
Owing to the complexity of the cases covered, the instructions for installation, use and
and imaginable
maintenance. If supplementary instructions are required or special
6

Related product manuals