--- MPC 20 & 50 TESTER - M-981136 (vers. BD) --- Page
29
9.- MAINTENANCE
The MPC does not require specialised maintenance. As far as possible
avoid any adjustment, maintenance or repairs when the equipment is open. If
this is unavoidable it must be done by qualified personnel or technicians well
informed of the procedure to follow.
Before any modification to the connections, replacement, maintenance or
repair, the equipment must be disconnected from the supply.
If any operating fault or equipment protection fault is suspected, the
equipment must be taken out of service ensuring that no accidental
reconnection may occur. The equipment is designed to have any of its
components replaced quickly in the event of breakdown.
10.- TECHNICAL SERVICE
In the event of any equipment failure or any operational queries please
contact the technical service of CIRCUTOR S.A.
CIRCUTOR S.A. - After sales service
c / Lepanto , 49
08223 - TERRASSA
tel - (+34) 93 - 745 29 00
e-mail: central@circutor.es
To Next Page
Loading...