--- MPC 20 & 50 TESTER - M-981136 (vers. BD) --- Page
4
MPC-20 & MPC-50
1.- PRELIMINARY WARNINGS:
1.1.- USUAL OPERATING PROCEDURE
The MPC-20 and MPC-50 testers are compact and robust and are
designed to test where large powers are needed for a short period of time:
- MPC-20: up to 12 kVA
- MPC-50: up to 20 kVA
Its microprocessor controlled testing system ensures that tests are made
in approximately 10 seconds.
Its portability means that weight has been kept to a minimum with the
use of minimal loss toroidal transformers.
Heat generated by the transformer windings is continuously eliminated
by an in-built ventilation system. It is able to operate indefinitely, making 12 sec.
tests at 40 sec. intervals. If for any reason it overheats, a red indicator light will
show why and will prevent it from operating until normal temperature is re-
established.
To Next Page
Loading...