Cisco MERAKI MR44 User Manual

MR44 Installation Guide
The Cisco Meraki MR44 is a dual-band enterprise-class 802.11ax cloud-managed access points. Designed for the highest capacity and highest density, MR44
meets the needs of the most demanding environments. The access point also includes a third radio dedicated to optimizing the RF environment and securing
the airwaves.
About this Guide
This guide provides instructions on how to install and configure your MR44 access points. This guide also provides mounting instructions and limited
troubleshooting procedures. For more wireless installation guides, refer to the wireless installation guides section on our documentation website.
Product Overview
Physical Specifications
MR44
Interfaces
• 1x 100/1000/2.5G BASE-T Ethernet (RJ45)
• 1x DC power connector (5.5 mm x 2.5 mm, center positive)
Power
• Power over Ethernet: 42.5 - 57 V (802.3at) or 37 - 57 V (802.3af) - low power mode **
• Alternative: 12 V DC input
• Power consumption: 30W max (802.3at) or 15W max (802.3af) - low power mode **
• Power over Ethernet injector and DC adapter sold separately
In low power mode, MR44 will do the following:
1. Downshift its Ethernet uplink speed from 2.5 Gbps to 1 Gbps
2. Transition from 4x4:4 to 2x2:2 in 5GHz
3. Disable its dedicated IoT (previously known as BLE) radio
4. Reduce the max Tx power
1

Cisco MERAKI MR44 Specifications

General

Power over Ethernet (PoE)	802.3at
Antenna	Integrated omni-directional antennas
Operating Temperature	0°C to 40°C
Model	MR44
USB Port	No
Cloud Management	Yes
Wireless Standards	802.11a/b/g/n/ac/ax
Frequency Bands	2.4 GHz, 5 GHz
Management	Cloud-managed
Mounting	Ceiling, Wall
Weight	0.8 kg

Summary

MR44 Product Overview

Physical Specifications

Details physical interfaces and power requirements.

Environmental Conditions

Specifies operating and storage temperature/humidity ranges.

Physical Security Features

Describes security screw options and Kensington lock.

Installation Preparation

Pre-installation Tasks

Essential setup steps before physical installation.

Network and Firewall Configuration

Guide to dashboard setup, firmware, and firewall settings.

IP Address Assignment

Methods for assigning IP addresses via DHCP or static.

Installation Tools and Hardware

Lists necessary tools and additional hardware for installation.

Mounting and Installation

Mounting Location Guidance

Criteria for selecting the optimal placement for the AP.

Mount Cradle Installation

Steps for attaching the mount cradle to walls, ceilings, or junction boxes.

Attach AP to Cradle

Steps to securely connect the MR44 AP to the installed mount cradle.

Desk or Shelf Mounting

Alternative method for placing the AP on a desk or shelf.

Verification and Troubleshooting

Physical Security Measures

How to use security screws and Kensington locks.

Device Functionality Verification

Checking LEDs, connectivity, and network coverage.

Basic Troubleshooting Procedures

Common issues and resolutions, including resets and port tests.

Static IP Configuration Check

Confirming correct static IP address configuration.

Support and Warranty

Warranty Information

Information on the warranty coverage for the MR44 AP.

Additional Support Resources

Contacting support and accessing further documentation.