Cisco 12000 Series

Cisco - Hardware Troubleshooting for Cisco 12000 Series Internet Router Line Card Failures
http://kbase/paws/servlet/ViewFile/15926/hwts_gsrlc_15926.xml?convertPaths=1[8/6/2010 3:56:13 PM]
gp : 40F57DC0, sp : 41BB8EE8, s8 : 41023740, ra : 406914C8
EPC : 0x406914C8, SREG : 0x34008103, Cause : 0x00000010
ErrorEPC : 0x400B3A5C
-Process Traceback= No Extra Traceback
SLOT 1:00:00:09: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) GS Software (GLC1-LC-M), Version 12.0(17)ST3,
EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Thu 08-Nov-01 20:21 by dchih
SLOT 1:20:18:09: %LCGE-6-GBIC_OIR: 3 Port Gigabit Ethernet GBIC
removed from port 2
SLOT 1:20:18:29: %LCGE-6-GBIC_OIR: 3 Port Gigabit Ethernet GBIC
inserted in port 2
SLOT 1:3d20h: %LCGE-6-GBIC_OIR: 3 Port Gigabit Ethernet GBIC
removed from port 2
SLOT 1:3d20h: %LCGE-6-GBIC_OIR: 3 Port Gigabit Ethernet GBIC
inserted in port 2
SLOT 1:00:00:09: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (TM) GS Software (GLC1-LC-M), Version 12.0(17)ST3,
EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Thu 08-Nov-01 20:21 by dchi
Line Card Crash
If a line card has crashed, and you have identified the line card that has crashed, you now need to determine the cause
of the crash. The output from the show context <slot> command enables you to do this. Here is an example:
Router#show context slot 2
CRASH INFO: Slot 2, Index 1, Crash at 12:24:22 MET Wed Nov 28 2001
VERSION:
GS Software (GLC1-LC-M), Version 12.0(18)S1,
EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Compiled Fri 07-Sep-01 20:13 by nmasa
Card Type: 3 Port Gigabit Ethernet, S/N
System exception: SIG=23, code=0x24, context=0x4103FE84
System restarted by a Software forced crash
STACK TRACE: