EasyManua.ls Logo

Cisco 1600 - Page 52

Cisco 1600
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Step 5 (Optional) Use the interactive restore menu to select system software and/or rule updates to include with the
restore process. See Select System Software and Rule Updates during Restore, on page 57.
Step 6 (Optional) Save the system configuration you have selected for use in future restore activities. See Save
Management Center Configuration, on page 61.
Step 7 Use the interactive restore menu to download the ISO and update files, and mount the image on the appliance.
See Download the ISO and Update Files and Mount the Image, on page 58.
Step 8 You have two options based on the software version to which you are restoring the appliance:
If you are restoring the system to a different major version, perform the two-pass restore process:
a. The first pass updates the restore image. See Update the Restore Image, on page 58.
b. The second pass installs the new version of the system software. See Install the New System Software
Version, on page 59.
If you are restoring the system to the same major version, you need only install the new version of the
system software. See Install the New System Software Version, on page 59.
What to do next
Restoring your management center to factory default settings results in the loss of almost all configuration
and event data on the appliance, including console display settings.
If you did not delete the appliance’s license and network settings, you can use a computer on your
management network to browse directly to the appliance’s web interface to perform the setup.
For more information, see the setup process appropriate to your version:
For versions 6.5 and later, see Perform Initial Setup at the Web Interface for Versions 6.5 and Later,
on page 12.
For Versions - 6.4x, see Management Center Initial Setup Using the Web Interface for Software
Versions 6.3 - 6.4, on page 25
If you deleted license and network settings, you must configure the appliance as if it were new, beginning
with configuring it to communicate on your management network.
For more information, see the setup process appropriate to your version:
For versions 6.5 and later, see Perform Initial Setup at the Web Interface for Versions 6.5 and Later,
on page 12.
For Versions - 6.4x, see Management Center Initial Setup Using the Web Interface for Software
Versions 6.3 - 6.4, on page 25
If you deregistered the management center from the Cisco Smart Software Manager, register the appliance
to the Cisco Smart Software Manager. Choose System > Licenses > Smart Licenses and click the
register icon.
Cisco Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
52
Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
Restore a Management Center to its Factory Defaults

Other manuals for Cisco 1600

Related product manuals